np20412

I can't find any tires that I can afford that are 265/40-17...or even 265/35-17...and plus 275 is just FAT

but thanks for the response Mongol, big thanks to Chanh55, mistuguy, and Blizzy as well.

slo86

what about 255/45. should be a little easier to find.

np20412

255/45 is what I have on there now, but I want to go wider than that..

np20412

Well folks, I got the 275/40-17 MOUNTED today, there is no rubbing that I can see or hear immediately, but it is VERY close...I feel like if I sit anyone in the backseat, it's gonna rub without a doubt....the car handles like a CHAMP, I love it, plus the tires are a little larger in overall diameter than the fronts, so now I have a bit more of a raked look than previously and I love that too Thanks to everyone for helping with this decision, unfortunately I don't have a camera until next week when I can take better pictures, for now this is the best I can do with my cell phone:

Toshima

Would this work a (front)20x10 25 offset with a 215/30 tire, and a (rear)20x10 25 offset with a 235/30 tire. Would this work with a 2 inch drop and rolled fenders and run some neg camber.

houstonT

Question:

19x9.5 front +44mm offset
19x10.5 rear +44mm offset

Will these work on an SC?

Thanks in advance,
Peter

plex

iTrader: (11)

Yea those will be fine you will just need a fender roll not sure what tires or suspensions setup you are going with but that you should be ok.

mitsuguy

iTrader: (2)

depends on tire size... that is almost more important than wheel size...

houstonT

The tires are:

265/30/19 front
305/30/19 rear

The tires are essentially flush with the wheels, have a nice lip protector... These are the wheels/tires in question:

mitsuguy

iTrader: (2)

nope, too wide to do without pulling the fender on an SC... It would be real close, but mods to the fenders would definitely have to be done and it would require more than rolling would accomplish...

houstonT

Ah IC IC, what size tire would make the fitment work? 295?
Peter

RedPhoenix

iTrader: (10)

Another rims test ...

Axis Matrix



19x9.5 40 offset (its high, but it has a 4" lip) i want to run a 10mm spacer
18x8 40 offset i want to run a 5-10mm spacer, still has over 2" lip

what do you think? how would these fit?

mitsuguy

iTrader: (2)

they will fit nicely - still depends on the tire size...

G Star

iTrader: (2)

barf....Volk GT-V knock off anybody??

RedPhoenix

iTrader: (10)

lmao look at that, stolen style. thats okay. im not buying volks id rather pay my college tuition.

comment on fitting?