When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm going to get a set of IS300 rims... I've seen them in person at 17x7 +50 245/45 and liked the look, I think it was 245 all the way around but could have been just rear.
I plan on getting the 17x7 +50 17x7.5 +55 combo
What width should I put on these wheels?
I'm at stock ride height, but when I lower I have no problem rolling fenders.
Last edited by chason; 10-16-14 at 01:56 PM.
Reason: details
I'm looking to run a meaty setup for the spring, but my current wheels are too aggressive. So my question is, what offsets would I need to run 18x9.5 front with a 265 tire, and 18x10.5 rear with a 305 tire and no camber? My guess would be in the 30-40 range for the rear? Fenders are rolled flat, Thanks.
To run a 305 tire in the rear, a +38 to +40 offset would be the most aggressive I'd go with fenders rolled flat. More aggressive than that, you're gonna need a slight pull.
I'm going to get a set of IS300 rims... I've seen them in person at 17x7 +50 245/45 and liked the look, I think it was 245 all the way around but could have been just rear.
I plan on getting the 17x7 +50 17x7.5 +55 combo
What width should I put on these wheels?
I'm at stock ride height, but when I lower I have no problem rolling fenders.
245s are the widest I'd go on for the 7.5 rears. I'd go with 225s for the fronts
About to pull the trigger on some XXR 968 wheels. But all of this damn offset crap has got my head in a spin. Ive come to the realization that im going to have to roll my fenders to achieve the look im going for. Question is...do i go with an 18x9 +35 all the way around, or 18x9 +20. And what damn tire sizes?!
Trying to shoot for the same setup that Equalizir has. But the wheels i want dont come in a 9.5
Will the 20 offset compared to his 22 offset make up for that difference??
About to pull the trigger on some XXR 968 wheels. But all of this damn offset crap has got my head in a spin. Ive come to the realization that im going to have to roll my fenders to achieve the look im going for. Question is...do i go with an 18x9 +35 all the way around, or 18x9 +20. And what damn tire sizes?!
Trying to shoot for the same setup that Equalizir has. But the wheels i want dont come in a 9.5
Will the 20 offset compared to his 22 offset make up for that difference??
1/2" = 15mm
Also.....making mutliple threads covering the same information is not going to make a difference.....just be patient and you will get the answers.
My new set up will be Work VS-SS (discontinued ) 18x9.5+15 235/35/18F 18x11+15 255/35/18 rear I don't think I will have any issues gonna run camber 2.5-3.0 all around lowered on BC coils just need to rebuild the wheels doing a brushed matte bronze finish all around lips and everything.
12-12-14, 04:39 PM
) 18x9.5+15 235/35/18F 18x11+15 255/35/18 rear I don't think I will have any issues gonna run camber 2.5-3.0 all around lowered on BC coils just need to rebuild the wheels doing a brushed matte bronze finish all around lips and everything.
