LSBen

I got around to sea foaming my RX330 today but instead of sea foam, i used the Berryman Chemtool Total combustion cleaner. It came with a tricked out tubing that you hook up directly to the car via brake booster cable or PVC valve. I used the brake booster connection. There's a y separator on the tube that draws in air to the car so the car won't stall out. Used the entire 15 oz can which took about 7-8 minutes. I was a little nervous since this is my 1st time doing this procedure but it went smoothly. Lots of white smoke out of the exhaust after I took it out for a spin. It was fun watching it spew out. Car runs even smoother and quieter than using just the fuel injector cleaner. I'm sure I could have achieved similar results using the Total Fuel System cleaner with PEA over a few tankful of gas but I couldn't wait that long to clean out the combustion chamber of carbon deposits. $13 for the Chemtool combustion cleaner kit and $4 for the Chemtool fuel injector cleaner. This DIY sure beats the $179 you would pay at the dealership and it's more fun to do. You will need to reset the check engine light by unplugging the battery or with a code scanner and reinitialize the windows. See pictures that follows. Sorry, no white smoke pictures.

LSBen

Above picture of manifold with brake booster cable

LSBen

Another view with everything hooked up