Need help with key
06-13-14, 10:04 PM
#1
Intermediate
Thread Starter
Join Date: Jun 2005
Location: il
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
Need help with key
I have read countless threads on programming key, all of which seem irrelevant to my issue. I have a 2007 Lexus RX350. I purchased a key blank, had it cut by lexus and programmed it myself with TIS Techstream. The keyless entry remote portion works fine, but the key does not start the car. It seems that the immobilizer does not recognize the key. Does anyone know how to do this?
06-18-14, 07:52 PM
#3
Intermediate
Thread Starter
Join Date: Jun 2005
Location: il
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
07-04-14, 02:08 PM
#5
After connecting to the vehicle, bouble click "Immobilizer", select "Utility", double click "Key Registration".
The rest is straight forward. It took me just one try because the keyless entry was already programmed with the pedal dance. Did you try a second time?
Now I supposed you already did all that? If so, try to check the type of user you selected in the configuration. I chose something like US Dealer. I heard some choices will not allow immobilizer programming.
Which version of Techstream are you using?
The rest is straight forward. It took me just one try because the keyless entry was already programmed with the pedal dance. Did you try a second time?
Now I supposed you already did all that? If so, try to check the type of user you selected in the configuration. I chose something like US Dealer. I heard some choices will not allow immobilizer programming.
Which version of Techstream are you using?
07-11-14, 06:44 AM
#6
Intermediate
Thread Starter
Join Date: Jun 2005
Location: il
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
After connecting to the vehicle, bouble click "Immobilizer", select "Utility", double click "Key Registration".
The rest is straight forward. It took me just one try because the keyless entry was already programmed with the pedal dance. Did you try a second time?
Now I supposed you already did all that? If so, try to check the type of user you selected in the configuration. I chose something like US Dealer. I heard some choices will not allow immobilizer programming.
Which version of Techstream are you using?
The rest is straight forward. It took me just one try because the keyless entry was already programmed with the pedal dance. Did you try a second time?
Now I supposed you already did all that? If so, try to check the type of user you selected in the configuration. I chose something like US Dealer. I heard some choices will not allow immobilizer programming.
Which version of Techstream are you using?
07-22-14, 05:44 PM
#7
Intermediate
Thread Starter
Join Date: Jun 2005
Location: il
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
Got it programmed. You were correct, under immobilizer>Utility
missed that Utility button when I was in there before.
On a side note. If anyone in the Chicagoland area needs a key programmed, send me an IM and I'll take care of CL members.
missed that Utility button when I was in there before.
On a side note. If anyone in the Chicagoland area needs a key programmed, send me an IM and I'll take care of CL members.
Thread
Thread Starter
Forum
Replies
Last Post
drich2905
LX - 1st and 2nd Gen (1996-2007)
4
07-26-13 01:51 PM
