RX - 2nd Gen (2004-2009) Discussion topics related to the 2004 -2009 RX330, RX350 and RX400H models

Pocket Type Cargo Net

Thread Tools
 
Search this Thread
 
Old 02-09-14, 06:33 AM
  #1  
Highway33
Driver School Candidate
Thread Starter
 
Highway33's Avatar
 
Join Date: Oct 2012
Location: North Carolina
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Default Pocket Type Cargo Net

I have a 2007 RX350. It came with a pocket type cargo net that has 2 lower clips and 2 upper elastic eyelet loops. I can't seem to figure out how it attaches. I see the pull down black anchors but I think they are for the "Spider" type cargo net, or for bungees. And even if I use the lower clips on them, where do the elastic eyelet loops get attached to. Anyone know?
Old 02-09-14, 07:14 AM
  #2  
tfischer
Moderator
 
tfischer's Avatar
 
Join Date: Feb 2001
Location: Cincinnati
Posts: 3,613
Received 191 Likes on 144 Posts
Default

I don't have an '07 or a cargo net, but I think that those nets came with two hooks that had to be affixed (screwed) to the sides of the interior. If this is accurate, perhaps all you need is to do a lap around the "hardware" bins at Home Depot.
Old 02-09-14, 09:08 PM
  #3  
mandyfig
Moderator
 
mandyfig's Avatar
 
Join Date: Apr 2007
Location: GA
Posts: 12,298
Received 408 Likes on 359 Posts
Default

Post some pics, let's see.
Old 02-10-14, 10:46 AM
  #4  
kickin8
2IS/2RX/4RX
iTrader: (1)
 
kickin8's Avatar
 
Join Date: Feb 2007
Location: SF Bay Area
Posts: 6,851
Received 25 Likes on 20 Posts
Default

you need the t-anchors

http://lexus.sewellparts.com/accesso...2007/3121.html

http://lexus.sewellparts.com/pdf/PT34748040.pdf
Old 02-10-14, 01:41 PM
  #5  
Highway33
Driver School Candidate
Thread Starter
 
Highway33's Avatar
 
Join Date: Oct 2012
Location: North Carolina
Posts: 35
Likes: 0
Received 0 Likes on 0 Posts
Default Pocket Type Cargo Net

Here are some pics. Kickin8, that's probably what I need. Thanks..
Attached Thumbnails Pocket Type Cargo Net-6-a.jpg   Pocket Type Cargo Net-5-a.jpg   Pocket Type Cargo Net-4-a.jpg  
Old 02-10-14, 02:02 PM
  #6  
mandyfig
Moderator
 
mandyfig's Avatar
 
Join Date: Apr 2007
Location: GA
Posts: 12,298
Received 408 Likes on 359 Posts
Default

You can get the hardware for it. Here’s a tip though, found this strategy here, use the Tonneau cover lever for the loop and the hooks hook into the metal hook in the bottom (deisgned for tie downs). I will see if I can locate a picture. I am sure there was a thread on this DIY. This way eliminates the need to bore holes and install the hooks. Otherwise you can easily find similar hardware that you can use. I do not think you can get the Lexus hardware without the net.
Old 02-10-14, 02:20 PM
  #7  
mandyfig
Moderator
 
mandyfig's Avatar
 
Join Date: Apr 2007
Location: GA
Posts: 12,298
Received 408 Likes on 359 Posts
Default

Here's what I meant...
Attached Thumbnails Pocket Type Cargo Net-6-a.jpg  
Old 02-10-14, 03:30 PM
  #8  
kickin8
2IS/2RX/4RX
iTrader: (1)
 
kickin8's Avatar
 
Join Date: Feb 2007
Location: SF Bay Area
Posts: 6,851
Received 25 Likes on 20 Posts
Default

Originally Posted by mandyfig
I do not think you can get the Lexus hardware without the net.
There's a part number for the anchors and I think they were less than $10 (I ordered a set before)
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lexuszim
RX - 2nd Gen (2004-2009)
1
06-25-17 03:10 PM
szafa82
RX - 2nd Gen (2004-2009)
3
07-12-12 03:33 PM
funcrusher
ES - 1st to 4th Gen (1990-2006)
7
11-28-11 08:34 PM
ralsty
SC- 1st Gen (1992-2000)
9
12-14-08 05:27 PM



Quick Reply: Pocket Type Cargo Net



All times are GMT -7. The time now is 07:24 AM.