transfer case 2008 RX350
11-13-12, 12:14 PM
#1
Driver School Candidate
Thread Starter
Join Date: Oct 2012
Location: AZ
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
transfer case 2008 RX350
I am attempting to change transfer case oil but unable to find a method to remove either plug on my RX350. Any help on how to remove plugs would be appreciated.
11-13-12, 03:10 PM
#2
Pole Position
Is it a 10mm hex allen that fits? If so I have cut the allens and put them in a regular socket than used a socket wrench on the old RX300...Also works on the RX400h for the trannies....Just remember fill plug first....just in case.
11-13-12, 03:47 PM
#3
Driver School Candidate
Thread Starter
Join Date: Oct 2012
Location: AZ
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Definitely not allen wrench. That is for the diff. Need something around 15/16" wrench. Not sure of the metric size. However, cannot get a wrench or socket on either fill or drain plug as exhaust pipe is in the way.
Thread
Thread Starter
Forum
Replies
Last Post
dcdyd
RX - 2nd Gen (2004-2009)
10
04-11-13 08:58 PM
