TrendyTodd

iTrader: (6)

Me too. Changed all interior lights with LED panels (where applicable), stock HID headlights, LED DRL/highbeams, LED parking lights.

Also changed out reverse lights and replaced with 1watt LED and replaced rear blinkers with 3watt LED.

kasey3881

I hvave an 08 rx350 in silver,and i replace all the bulbs in this SUV
including headlight to HID 6000K,foglight to yellow and all the bulbs inside,dome trunk vanity. its worth every penny i spent.

Kasey3881 08 rx350 silver.

mandyfig

How much was the total capital outlay for the conversion?

...and finally broke the 4K!

jmonkie76

I had just saved up to do the LED conversion for my RX330. I do have a few questions for everyone that did there's. Are all your LEDs SMD type or are some the regular ones.

alitech

Thanks very much for this post. I had no idea we could do so much with the lighting. I only had to see this post to get motivated to do something. I immediately placed a few orders totalling to about £70. Thats roughly around $100.

Only, just today I found out that one of the people you recommend warden_jp2002 has a shop outside of ebay that can do combined shipping saving a bucket load. I emailed him about the costs of shipping and he advised to buy directly from his online shop where the shipping is much less. I think I am looking at a potential saving of about $20 if you go direct.

http://www.wardenjp.com/stores/

jmonkie76

I'm just about to install my trunk and license plate lights. You said some of the bulbs are looser so you used silicone to connect them. What kind did you use - glue, tape?

willyb0b

can u post a photo of the license plate light on with the new led in? i want to see how that looks at night

willyb0b

thanks for the write up... i ordered off the two guys you recommended

got front door lights
front and rear dome
all trunk lights
license plate light
led fog lamps
leds to replace the parking lights (daytime running lights)

shipping from hong kong to the US is slow but i'm in no hurry

infinirx

Couple of updated decent and color corrected photos for real life examples.

LED's in front and rear. Rear is allot brighter but oh well. Looks great to me cause they look kind of purposeful in a way. The design in the front is in sections and seems to hinder the LED's more than the rears. Interesting cause the LED's I used are identical in both size, width, length and amount.


Plate lights. I had to buy ones with multiple LED"s on every side cause the others were just not bright at all. These really are just right.

willyb0b

this afternoon i installed the 3 trunk lights, license plate lights, front door panels, and rear dome light

i have more leds coming in the mail: 4 vanity lights, another 36 led board for the front dome light, 2 for the map lights, led fog lights, and led parking/driving lights

ColdLexus

Love the look of the LEDs. Will have to make this a summer project.

mandyfig

Have to get this done for me, too! Great DIY's!

myw

thank you for all the advice on this thread... ordered the exact lights as stated and am going to try the install now!

mucho thanks again

HtownBlue

I highly recommend this process. You can cheaply and easily modify your ride and it looks freaking cool.
Just did mine this afternoon. I can post pics if needed.
Thanks to the OP.

Meadow

How much did the LED's run you? Where did you buy them from? Pics would be great!