DIY: Re-sealing headlamp to stop condensation!

[mandyfig]

Finally tackled the head lamp condensation. Printed the bumper and head lamp removal from the manual. Pretty straightforward.

Note: You do not need to remove the whole fender liner, just half way, you just want to access the bolt and to unclaw the bumper. You do not need to remove the whole bumper, just the side you want to work on.

Here's the DIY:

Step 1: Remove Engine Cover 1, same cover when you change your filter.

Step 2: Remove 2 bumper bolts, 3 plastic snaps. Remove fender liner.