Lexus RX330/350/400h LED Turn Signal Mirror
07-20-09, 09:07 AM
#31
07-20-09, 09:19 AM
#32
Still want to see the DIY. I may have to do it sometime, you'll never know.
07-20-09, 09:20 AM
#33
Can you please post the link to the DIY? I saw one but not the complete version, especially where the puddle light needs tapping.
07-20-09, 10:05 AM
#34
Mandyfig, that is the one I used too, along with Nigel's instruction. I will scan the instruction into pdf so you can take a look at it prior to purchase and install.
The part I hated the most was undoing the plug for the side mirror and reassemble and feeding the wire through the door to the kick panel.You really have to make note of the exact color of the wire you have vs one on instruction, there was a couple of color that didn't match. As far as the puddle light, I tapped into the power of the illuminating door sills. You already know where the turn signal wires are so use those same wires for the turn signals.
The part I hated the most was undoing the plug for the side mirror and reassemble and feeding the wire through the door to the kick panel.You really have to make note of the exact color of the wire you have vs one on instruction, there was a couple of color that didn't match. As far as the puddle light, I tapped into the power of the illuminating door sills. You already know where the turn signal wires are so use those same wires for the turn signals.
Last edited by mowmow; 07-20-09 at 06:06 PM.
07-21-09, 07:38 PM
#36
Driver School Candidate
Join Date: Mar 2009
Location: Virginia
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Hey Nigel, that reminds me the package I've received from you did not come with the LED side mirror installation instruction for the 2009 RX350. Can you PM me the instruction? Thanks.
07-22-09, 05:27 AM
#38
mowmow, pm sent, thanks!
08-05-09, 05:13 AM
#41
Driver School Candidate
Join Date: Mar 2009
Location: Virginia
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
08-06-09, 02:33 PM
#45
Lexus Test Driver
Why not post the instructions on this forum. As more people "see" what's involved in the installation process, it could prompt them to "buy".