RX - 1st Gen (1999-2003) Discussion topics related to the 1999 -2003 RX300 models

RX300 Front Driver side door stuck closed

Thread Tools
 
Search this Thread
 
Old 08-25-14, 03:38 PM
  #1  
Arphahat
Driver School Candidate
Thread Starter
 
Arphahat's Avatar
 
Join Date: Aug 2014
Location: MI
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default RX300 Front Driver side door stuck closed

I went through the actuator replacement thread on Sunday and something isn't quite right. I cannot unlock or open my door now. When I use the unlock button on the wood panel, I hear a loud buzz instead of it unlocking. Though, the door button indicates that it is in the unlocked position, but it cannot really be moved manually. Trying to unlock the door with the key resists and doesn't unlock.. Pulling the door handles seems to move the mechanisms, so I am thinking it is just stuck locked somehow.

Today, I just went through the passenger side to get in and out of my car, but would like to try and fix this. The first thing I need is to get the door open again. Any idea how I can do that?

My original post was on this thread, but it seemed a more general issue than just the actuator replacement. Read more: https://www.clublexus.com/forums/rx-...#ixzz3BRhAVV69
Old 08-25-14, 06:09 PM
  #2  
salimshah
Moderator
 
salimshah's Avatar
 
Join Date: Apr 2001
Location: Austin, TX
Posts: 15,270
Received 995 Likes on 899 Posts
Default

The only logical next step is to open up the lock assembly and examine it. Lock is engaged by Two which are mechanical and one is electrical. The key based mechanical is also electronically reinforced. So if the electronic reinforcement preventing you from unlocking, you can disconnect the battery and then use the key to unlock.

Our collective advice has been to leave the door panel unattached till you verify the lock and door release is working properly.

Salim
Old 08-25-14, 07:58 PM
  #3  
Arphahat
Driver School Candidate
Thread Starter
 
Arphahat's Avatar
 
Join Date: Aug 2014
Location: MI
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by salimshah
The only logical next step is to open up the lock assembly and examine it. Lock is engaged by Two which are mechanical and one is electrical. The key based mechanical is also electronically reinforced. So if the electronic reinforcement preventing you from unlocking, you can disconnect the battery and then use the key to unlock.
Ah, that is helpful. I'll give this a try tomorrow. Thanks!

Originally Posted by salimshah
Our collective advice has been to leave the door panel unattached till you verify the lock and door release is working properly.
I agree that this makes complete sense, but missed it in the thread. Really, it seems pretty obvious now. This is really my first "complicated" automotive fix, so some of the learning has to be the hard way, right?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jlb5685
IS - 2nd Gen (2006-2013)
3
04-06-14 04:56 PM
Ca1vN
IS - 2nd Gen (2006-2013)
20
12-29-12 11:33 AM
bdevlin197
ES - 1st to 4th Gen (1990-2006)
2
07-04-11 07:33 AM
worker
GS - 3rd Gen (2006-2011)
6
07-17-10 01:05 PM
czarg
ES - 1st to 4th Gen (1990-2006)
2
04-26-07 05:31 AM



Quick Reply: RX300 Front Driver side door stuck closed



All times are GMT -7. The time now is 11:12 AM.