rx300 runs ruff with multiple codes help please
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2014
Location: washington
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
rx300 runs ruff with multiple codes help please
my 99 rx300 started running really ruff sputtering, codes thrown were p1346, p1349 vvt system malfunction, a/f sensor circuit response malfunction bank 1 sensor 1 bank 2 sensor 1. I checked the timing belt and it looks good its tight and all the timings marks are lined up so what should I do next I really need the car going and don't know what to try next?? help please
*
*
#2
Cody, welcome to the forum. If you go to the Lexus Models/RX forums, you'll find a section with the RX300 owners. That will probably give you more help.
my 99 rx300 started running really ruff sputtering, codes thrown were p1346, p1349 vvt system malfunction, a/f sensor circuit response malfunction bank 1 sensor 1 bank 2 sensor 1. I checked the timing belt and it looks good its tight and all the timings marks are lined up so what should I do next I really need the car going and don't know what to try next?? help please
*
*
#3
Lexus Fanatic
iTrader: (20)
moving. best of luck!
#4
Often in our beloved RX's the OCV's get blocked up from our sludge factory of an engine.
I'd replace them as basic RX maintenance anyways but you can try removing them and cleaning. Though often they "look" ok but in fact are bad.
I'm sure others will chime in with support as well.
I'd replace them as basic RX maintenance anyways but you can try removing them and cleaning. Though often they "look" ok but in fact are bad.
I'm sure others will chime in with support as well.
Thread
Thread Starter
Forum
Replies
Last Post
rmuthiah
ES - 1st to 4th Gen (1990-2006)
1
12-01-19 11:24 AM
Mystery
RX - 1st Gen (1999-2003)
68
11-10-18 06:33 PM