2000 RX 300, Code P1349, P0300, P0301, P0303 & P0305
#1
Driver
Thread Starter
Join Date: Feb 2007
Location: PA
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
2000 RX 300, Code P1349, P0300, P0301, P0303 & P0305
2000 RX 300, with 186,000 miles on it, I'm getting the following Codes P1349, P0300, P0301, P0303 & P0305.
Misfire of cylinders 1, 3 & 5. I'm assuming the variable timing (VVT) solenoid is shot. Should I replace both or just clean filter?
Tom.
Misfire of cylinders 1, 3 & 5. I'm assuming the variable timing (VVT) solenoid is shot. Should I replace both or just clean filter?
Tom.
Last edited by mtom01; 12-10-23 at 07:04 PM.
#2
Probably in the sticky diy's
#4
Advanced
When mine threw a code P1349 (bank one, firewall side), I removed and inspected it. It look fine, but after researching the forum, I decided to replace both of them. Purchased mine at NAPA, $65 for one and $61 for the other. They were simple to replace. There is good info here on the forum, just use the search feature and you will find all that you need. I don't know about the other codes, maybe they are caused by the P1349. I noticed my car acting a little funny just before it threw the P1349 code. seemed like it was stumbling on take off. As soon as the light came on, I drove straight home and fixed it the next day.
Thread
Thread Starter
Forum
Replies
Last Post
JcAviles
RX - 1st Gen (1999-2003)
2
01-31-18 03:03 PM
finga11
ES - 1st to 4th Gen (1990-2006)
3
12-19-12 04:39 PM