RX - 1st Gen (1999-2003) Discussion topics related to the 1999 -2003 RX300 models

RX300 won't start, no light on dash board

Thread Tools
 
Search this Thread
 
Old 10-22-12, 02:13 AM
  #1  
tatewu
Driver School Candidate
Thread Starter
 
tatewu's Avatar
 
Join Date: Oct 2012
Location: CA
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default RX300 won't start, no light on dash board

Parking in a underground parking for one week. When I picked up the car, it seems to be out of battery. Valet tried to jump the car and alarm went off non stop. After reading several threads, I use the key to open driver side door and the alarm went off.

Now head lights work and remote alarm key also works but I can't start the car. Also when the key is in the ignition switch to the ON position, there is no light on the dash board.

Pls help! Thanks in advance.
Old 10-22-12, 03:36 AM
  #2  
hypervish
Lexus Test Driver
 
hypervish's Avatar
 
Join Date: Aug 2009
Location: NJ
Posts: 5,698
Received 88 Likes on 75 Posts
Default

Welcome to Club Lexus!

It sounds like the battery is done for, and some batteries such as this one won't even start a car with a jumper cable attached.

I'd pull the battery, and get it tested. I have a feeling it will fail.
Old 10-22-12, 06:30 AM
  #3  
salimshah
Moderator
 
salimshah's Avatar
 
Join Date: Apr 2001
Location: Austin, TX
Posts: 15,269
Received 994 Likes on 898 Posts
Default

Did any one cross wires while trying to jump.

Salim
Old 10-22-12, 06:38 AM
  #4  
Australian
Advanced
 
Australian's Avatar
 
Join Date: Nov 2010
Location: NSW
Posts: 511
Received 26 Likes on 25 Posts
Default

sounds like your engine immobiliser has kicked in.
You need to reset the engine immobiliser put the key door and lock, and unlock a few times and then use the remote to lock and unlock this will reset it.
If not someone has fried something if no dash lights that bit worries when you have headlights. I don't have a stock key any more but i suspect the battery discharged completely at some point.

Last edited by Australian; 10-22-12 at 06:43 AM.
Old 10-22-12, 10:03 AM
  #5  
tatewu
Driver School Candidate
Thread Starter
 
tatewu's Avatar
 
Join Date: Oct 2012
Location: CA
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by salimshah
Did any one cross wires while trying to jump.

Salim
What do you mean cross wires? Put red on black and black on red? Probably not ...
Old 10-22-12, 10:04 AM
  #6  
tatewu
Driver School Candidate
Thread Starter
 
tatewu's Avatar
 
Join Date: Oct 2012
Location: CA
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Australian
sounds like your engine immobiliser has kicked in.
You need to reset the engine immobiliser put the key door and lock, and unlock a few times and then use the remote to lock and unlock this will reset it.
If not someone has fried something if no dash lights that bit worries when you have headlights. I don't have a stock key any more but i suspect the battery discharged completely at some point.
Is there a specific sequence to lock and unlock? I tried lock and unlock with the key and remote many times last night but nothing happens.
Old 10-22-12, 10:05 AM
  #7  
tatewu
Driver School Candidate
Thread Starter
 
tatewu's Avatar
 
Join Date: Oct 2012
Location: CA
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Thank you guys for helping out. I really appreciated
Old 10-22-12, 01:23 PM
  #8  
salimshah
Moderator
 
salimshah's Avatar
 
Join Date: Apr 2001
Location: Austin, TX
Posts: 15,269
Received 994 Likes on 898 Posts
Default

The imobilizer kills the spark.
Does your starter spin the engine? From your post it seems starter is not working.

Salim
Old 10-22-12, 02:06 PM
  #9  
tatewu
Driver School Candidate
Thread Starter
 
tatewu's Avatar
 
Join Date: Oct 2012
Location: CA
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by salimshah
The imobilizer kills the spark.
Does your starter spin the engine? From your post it seems starter is not working.

Salim
Absolutely no sound.

If it kills the spark, does that mean I need to replace with new spark?
Old 10-22-12, 02:15 PM
  #10  
SC400slide
In Recovery Mode

iTrader: (11)
 
SC400slide's Avatar
 
Join Date: Apr 2012
Location: NM
Posts: 3,868
Received 33 Likes on 27 Posts
Default

Just reset the ECU. That will kill all of the settings you had set before in the vehicle. I think hypervish is right in that your battery drained out, left a light on or something, either try to get that batterycharged, or replace it. Is there any power options or lights working inside? If not, it's the battery.
Just my 3 cents

Last edited by SC400slide; 10-22-12 at 02:15 PM. Reason: i'm awful with grammer...
Old 10-22-12, 02:25 PM
  #11  
salimshah
Moderator
 
salimshah's Avatar
 
Join Date: Apr 2001
Location: Austin, TX
Posts: 15,269
Received 994 Likes on 898 Posts
Default

Originally Posted by tatewu
Absolutely no sound.

If it kills the spark, does that mean I need to replace with new spark?
Please have a competent mechanic take a look at your RX. Trying to diagnose remotely will be difficult.

On my RX the Neg (gnd) has a red mark and if you try to go by color, it can be misleading.

Salim
Old 10-22-12, 02:27 PM
  #12  
tatewu
Driver School Candidate
Thread Starter
 
tatewu's Avatar
 
Join Date: Oct 2012
Location: CA
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by SC400slide
Just reset the ECU. That will kill all of the settings you had set before in the vehicle. I think hypervish is right in that your battery drained out, left a light on or something, either try to get that batterycharged, or replace it. Is there any power options or lights working inside? If not, it's the battery.
Just my 3 cents
Head light is working ... not sure if any other light inside is working ...
Old 10-23-12, 03:39 AM
  #13  
tatewu
Driver School Candidate
Thread Starter
 
tatewu's Avatar
 
Join Date: Oct 2012
Location: CA
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by SC400slide
Just reset the ECU. That will kill all of the settings you had set before in the vehicle. I think hypervish is right in that your battery drained out, left a light on or something, either try to get that batterycharged, or replace it. Is there any power options or lights working inside? If not, it's the battery.
Just my 3 cents
Can you please tell me how do I reset ECU? Or what is ECU?
Old 10-23-12, 04:10 AM
  #14  
carguy07
Lexus Champion
 
carguy07's Avatar
 
Join Date: Nov 2005
Location: OH
Posts: 2,110
Received 73 Likes on 65 Posts
Default

Originally Posted by tatewu
Can you please tell me how do I reset ECU? Or what is ECU?
Engine or Electronic Control Unit (the computer), just disconnect the battery for a few minutes and that will do it.
Old 10-23-12, 05:01 AM
  #15  
tatewu
Driver School Candidate
Thread Starter
 
tatewu's Avatar
 
Join Date: Oct 2012
Location: CA
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by carguy07
Engine or Electronic Control Unit (the computer), just disconnect the battery for a few minutes and that will do it.
I will try that first before changing a new battery. Thanks!

If it is possible, can you please give me a link to a good instruction to disconnect a battery, safely?

Thanks again!


Quick Reply: RX300 won't start, no light on dash board



All times are GMT -7. The time now is 11:17 PM.