Cracked key shell casing - help needed
#31
Driver School Candidate
Join Date: Feb 2010
Location: TX
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
New Lexus 2003 LS430 key shell
2/8/2014
Today I received two new shells with the key cut from Remote4less. I sent them the 5 digit code from my car and they cut the blade. The cuts were included in the $24. It works for me.
Donberto
Today I received two new shells with the key cut from Remote4less. I sent them the 5 digit code from my car and they cut the blade. The cuts were included in the $24. It works for me.
Donberto
#32
Driver School Candidate
#34
Driver School Candidate
Join Date: Jul 2013
Location: Fl.
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Go to Ebay for key shell.
I had the same problem and got a key shell with a blank key for about $4 on Ebay. It is easy to switch over the interior piece, no programming is required. You have to get the key blank cut. If anyone knows where I can get that done in Coral Springs/Tamarac Florida I would appreciate the info. All the best and let me know how you made out.
#35
Moderator
I had the same problem and got a key shell with a blank key for about $4 on Ebay. It is easy to switch over the interior piece, no programming is required. You have to get the key blank cut. If anyone knows where I can get that done in Coral Springs/Tamarac Florida I would appreciate the info. All the best and let me know how you made out.
Salim
#36
Lexus Test Driver
I had the same problem and got a key shell with a blank key for about $4 on Ebay. It is easy to switch over the interior piece, no programming is required. You have to get the key blank cut. If anyone knows where I can get that done in Coral Springs/Tamarac Florida I would appreciate the info. All the best and let me know how you made out.
#37
Driver School Candidate
Join Date: Jul 2013
Location: Fl.
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Thanks to all for your responses. I have already transferred the electronics part and will visit a dealer to get it cut, now that I have a ball park for the cost, when I have the time. It is my spare key.
#38
Replacing keys
So, I just broke my second (original) key shell. Plastic snapped right above the metal shaft.
Is there a consensus on the best way to get a new key for an RX300? I was going to go to the dealer and buy a blank key ($10), have them cut it ($25), and then witch out the electronics myself.
I've seen that you can order already cut keys. Has anyone tried that? Is it less expensive?
David
Is there a consensus on the best way to get a new key for an RX300? I was going to go to the dealer and buy a blank key ($10), have them cut it ($25), and then witch out the electronics myself.
I've seen that you can order already cut keys. Has anyone tried that? Is it less expensive?
David
#39
Driver School Candidate
Join Date: Jul 2013
Location: Fl.
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Key case Rx300
I bought a key case with blank key on Ebay for $3.95 including shipping. The electronics are very easy to transfer and don't require reprogramming. An instruction leaflet was inside but I did not need it. This is a spare key so I have not had a chance to cut it yet. $10. from the dealer is ok though and you could get it all done at the same time. Hope it all works out.
#40
There is FINALLY a better replacement key that provides a lifetime warranty - it's called the Eternity Key. It's cheaper than Lexus OEM products and stronger than anything on the market. Get info at www.eternitykey.com- check under ORDER to see where you can purchase it - or ask your dealer! You will never have to buy another key again!
#42
There is finally a solution to the Lexus broken key problem!! The best replacement on the market is called the Eternity Key. The others break and its costly to replace over and over. The Eternity Key is made of military grade materials, stronger than anything on the market, and has a lifetime warranty. Available at Lexus dealers or see www.eternitykey.com for dealers.
#44
Moderator
#45
Replacement key
The original fob key shell for my '99 RX has separated, I have the key. Currently I am using the back up valet key but obviously I want this fixed. What is the best way? Dealer? Here is a company I found through an internet search - sounds like $15 for the shell and $30 for key shell cutting (which I don't really understand but assume it's to fit the key in the casing)http://www.autotransponder.com/1999_...key_shell_case
Anyone have this issue before? Any advice? Thank you in advance.
Anyone have this issue before? Any advice? Thank you in advance.