RX - 1st Gen (1999-2003) Discussion topics related to the 1999 -2003 RX300 models

Oh no code P0770 !! one sick SUV :(

Old 11-05-10, 07:01 AM
  #1  
rx300mm
Intermediate
Thread Starter
 
rx300mm's Avatar
 
Join Date: Jul 2004
Location: Ontario Canada
Posts: 410
Received 13 Likes on 12 Posts
Default Oh no code P0770 !! one sick SUV :(

Sad days ..
My RX300 (2001 with 95k miles) started with whining noise symptom, after two weeks into changing timing belt and water pump, I was thinking it was coming from the other 2 belts.
A week later that comes the jerky shifting of gears between 1 - 2, 2 - 3, 3 - 4 , once in 4 it's fine.
Few days later came the "VSC and Engine light on" (regards to "VSC and engine" light there is lots on the forum).
Went to a garage run computer tests and one of the reading was trouble code = P0770 which reads as a Shift Solenoid E Malfunction .. tranny issues !!
Next steps .. I will leave it with my garage mechanic for few days, he is looking for used tranny (does not recommend reconditioned as his 1st choice), he will open the oil pan, etc and work on it .. I guess. He suggested the cost will be upto $3000, I will know when it is fixed.
I am upset, but this suv has not given me any issues for last 6 yrs that I used it for. Looking forward to getting it back cured.

Any advise would useful .. replacing used vs reconditioned tranny, etc.
Old 11-05-10, 08:34 AM
  #2  
salimshah
Moderator
 
salimshah's Avatar
 
Join Date: Apr 2001
Location: Austin, TX
Posts: 15,260
Received 992 Likes on 897 Posts
Default

Does the mechanic recommend replacing/over-hauling the transmission. Code issue can be sensor/wire issue. When ever the vehicle is worked on, there is a chance of collateral damage ... pinched wire etc etc.

I would make sure it is not a case of throwing the baby out with the wash waster.

Salim
Old 11-05-10, 09:02 AM
  #3  
rx300mm
Intermediate
Thread Starter
 
rx300mm's Avatar
 
Join Date: Jul 2004
Location: Ontario Canada
Posts: 410
Received 13 Likes on 12 Posts
Default

Salim,
Thats a good point, the last thing that was done was to replace the timing belt (but not with the same guy), driving was fine for 10 days.
The mechanic was thinking of replacing the transmission not over-hauling it, he mentioned that it will be time consuming task and labour would add up to same cost of replacing it. That was his thinking, the good thing is I know the guy and I do trust his opinion but everyone wants to make a living
Old 11-05-10, 09:03 AM
  #4  
hypervish
Lexus Test Driver
 
hypervish's Avatar
 
Join Date: Aug 2009
Location: NJ
Posts: 5,698
Received 88 Likes on 75 Posts
Default

Why are you throwing a transmission at it? Why don't you replace the solenoid, it may be something so simple.
Old 01-13-13, 09:34 AM
  #5  
avatar4559
Driver School Candidate
 
avatar4559's Avatar
 
Join Date: Jan 2013
Location: Tennessee
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

Hi guys! My RX300 showed no signs of a problem with the exception of a whining noise coming from the trans. This noise went away when the vehicle warmed up, so I just chalked it up to high mileage (148000). Within 4 hours, things went from a "jerk" when shifting into 3rd gear, to the CEL and VSC & TRAC OFF light coming on, to shift issues and loss of movement. I was able to drive it back home after restarting the vehicle. Note: the whining noise is not as noticeable now. HELLLLLP!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Blk04GS430
GS - 2nd Gen (1998-2005)
4
01-26-22 08:42 AM
Lexmex
RX - 1st Gen (1999-2003)
23
11-10-18 09:30 PM
jasone36
SC430 - 2nd Gen (2001-2010)
0
12-12-14 07:17 AM
red13
RX - 1st Gen (1999-2003)
17
10-27-11 07:54 AM
adamyansam
ES - 1st to 4th Gen (1990-2006)
1
03-14-11 07:48 AM


Thread Tools
Search this Thread
Quick Reply: Oh no code P0770 !! one sick SUV :(



All times are GMT -7. The time now is 04:04 PM.