Weapon R Ram air kit
#1
Pole Position
Thread Starter
iTrader: (1)
Join Date: Jul 2001
Location: Vancouver
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Weapon R Ram air kit
Hi guys, I got the Weapon R intake for quite a while now and just bought the Ram air kit as well, however, i am having some trouble installing it, has anyone try installing that thing so they can give me some feedback?
#2
yeah i've installed mine with the ram kit. under the light there's is a whole if you notice, in the bumper. Perfect place, i got it down there hidden from site, and perfect! catch me on aim my screen name is tameido. Later
#3
Pole Position
Thread Starter
iTrader: (1)
Join Date: Jul 2001
Location: Vancouver
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Well I thought I couldn't install that Ram air kit, okay, I am not too good with the RX, can u take me through step by step of how u can mount that thing and how that tube goes?? Cuz I looked very hard on how to find a spot for the tube and the air duct. Got any pics of ur setup?
#4
k lets take this step by step, first of all you've already taken out the stock airbox on top (i'm assuming)
1) next to the fuse box there if you look under it and to the left (standing in the left of the car near the tire) there is a black box attached to the side with a very big screw, unscrew and take it out
2) attached to the smaller airbox that you have just removed is another airbox below if you look from the top, you'll have to remove you left tire (front driver side tire) to then follow the screws after you've removed the tire and get into that airbox and take that out
3) Run the tubing that weapon r gave you, modify/bend the metal piece and attach the cold air scoop. run the tube up to your intake.
Sorry I don't have a digi cam or a scanner wish i did. Hope this helps you. If you have any questions ask me
1) next to the fuse box there if you look under it and to the left (standing in the left of the car near the tire) there is a black box attached to the side with a very big screw, unscrew and take it out
2) attached to the smaller airbox that you have just removed is another airbox below if you look from the top, you'll have to remove you left tire (front driver side tire) to then follow the screws after you've removed the tire and get into that airbox and take that out
3) Run the tubing that weapon r gave you, modify/bend the metal piece and attach the cold air scoop. run the tube up to your intake.
Sorry I don't have a digi cam or a scanner wish i did. Hope this helps you. If you have any questions ask me
Thread
Thread Starter
Forum
Replies
Last Post
GSPfan
LS460 / 430 / 400 / 600h Classifieds
1
12-20-07 06:45 AM