Help with the pinout on the back of the nav screen
03-29-06, 01:53 AM
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2006
Location: fl
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Help with the pinout on the back of the nav screen
--------------------------------------------------------------------------------
I am going to connect an external dvd to the sat nav screen of my RX300.
On the back of the screen I have four connectors, one of those is for the rgb input (five wires).
I have the video to rgb conversor, the vais input device for the ipod and an extra audio input...
The project is almost finished!
But I still need the pinout meaning for each of these connectors, I donīt want to burn the screen with a miss connection...
If anybody knows the pinout meaning of this connector, I will appreciatte too much,
Thanks!
I am going to connect an external dvd to the sat nav screen of my RX300.
On the back of the screen I have four connectors, one of those is for the rgb input (five wires).
I have the video to rgb conversor, the vais input device for the ipod and an extra audio input...
The project is almost finished!
But I still need the pinout meaning for each of these connectors, I donīt want to burn the screen with a miss connection...
If anybody knows the pinout meaning of this connector, I will appreciatte too much,
Thanks!
01-06-11, 02:13 PM
#2
Driver School Candidate
Join Date: Nov 2010
Location: pa
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
youtube video
I was wondering if you finally figured out the wiring (I hopping you re the same person that posted the youtube video). If so could you help me out and let me know which wires are Red Green Blue
Thanks
Thanks
Thread
Thread Starter
Forum
Replies
Last Post