Rotora BBK for RX300
#1
Lexus Champion
Thread Starter
Rotora BBK for RX300
An UPS truck came, and has this early Christmas gift for my RX300
13" cross drilled/slotted directional vented two piece rotors. stainless steel brake lines w/ protective clear covering
4 piston calipers, ceramic pads
Close up on the directional vanes
Check out Lexmex's pulley thread, that is my next mod after installing BBK myself.
https://www.clublexus.com/forums/sho...d.php?t=190667
13" cross drilled/slotted directional vented two piece rotors. stainless steel brake lines w/ protective clear covering
4 piston calipers, ceramic pads
Close up on the directional vanes
Check out Lexmex's pulley thread, that is my next mod after installing BBK myself.
https://www.clublexus.com/forums/sho...d.php?t=190667
#4
Lexus Champion
Thread Starter
Thanks, Rotora has it listed $1995, but if you know their distributor you can get a better price. PM me if you need the inform where I bought it from. Rotora also has a 6 piston 14 inch BBK, obviously it will cost more. I will post more picture after I installed it on my RX300.
#5
Lexus Champion
Thread Starter
Pictures for forged rims and H&R spacer
Originally Posted by Bercasio
Very nice!!! What are the specs? And how much for that set? Was wondering to pick those up for my RX300, along with my 1st gen LS4.....otherwise congrats to ya'!
4 piston loaded caliper 9.7 lbs, unloaded 5.3 lbs,2 pistons on each side: stock is one piston, obviously can only clamp from one side.
You need 17" rims to clear 4 pot BBK, 18" rims to clear 6 pot BBK.
Pictures of what I gather so far for this BBK project.
ATE SuperBlue brake fluid and H&R 25mm spacer, 25mm is big but no need to install extended stubs
SSR Competition forged 18x7.5,
Did I mentioned forged rims? 15.4lbs per rim, that is 10lbs less than stock 16"
Now my RX can smoke MDX in performance braking, I need more HP from 1mzfe, anyone wants to join us in Lexmex's pulley thread?
https://www.clublexus.com/forums/sho...d.php?t=190667
#7
Lexus Champion
Thread Starter
cantsleepnk, Here is SSR Competition (Type C in JDM)'s spec. +42 is why I got H&R spacers. I plan to mount them on Pirelli Scorpion Zero 235/60/18 (Cayenne's OEM tire). I need sticker tires (higher braking limit) so brake balance is not too front biased.
Are you into pulley -> https://www.clublexus.com/forums/sho...d.php?t=190667
On exhaust, I have not found a good cat-back system. 5 zigen used to make one but not anymore.
Are you into pulley -> https://www.clublexus.com/forums/sho...d.php?t=190667
On exhaust, I have not found a good cat-back system. 5 zigen used to make one but not anymore.
Last edited by TunedRX300; 12-12-05 at 09:53 AM.
Trending Topics
#8
Super Moderator
Originally Posted by ACleanSC4
wow nice!!! I was just thinking about brakes today for the RX...
how much did that set you back if you don't mind me asking? Do you have an exhaust yet?
how much did that set you back if you don't mind me asking? Do you have an exhaust yet?
#9
Lexus Test Driver
Speaking of mufflers, what options do I have besides those I found on L-Tuned? I'm planning on purchasing the RMM based on it's look and I've heard it sounds great.
#10
Super Moderator
Before I had my current Arvin muffler, I had an APC Intimidator Muffler 156020 and a 2.5 inch pipe going back from the stock resonator that eliminated the S angle. (2 inch is the normal pipe) See www.4apc.net and look under Performance then mufflers to get an idea about different types out there.
#11
Pole Position
Join Date: Jan 2002
Location: Washington
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
dude! one word - SWEET! man, i was thinkin' about doin' a BBK too but my pockets are lookin' kinda tight right now post pics pics pics! you know the deal, man...merry xmas!
#12
Lexus Champion
Thread Starter
Originally Posted by StrmRdr23
dude! one word - SWEET! man, i was thinkin' about doin' a BBK too but my pockets are lookin' kinda tight right now post pics pics pics! you know the deal, man...merry xmas!
https://www.clublexus.com/forums/sho...threadid=25767
I have some Gorilla acorn tuner lug nuts 12x1.5, will buy additional wheel lock to protect my investments
#14
Lexus Champion
Thread Starter
Originally Posted by tcheung87
Speaking of mufflers, what options do I have besides those I found on L-Tuned? I'm planning on purchasing the RMM based on it's look and I've heard it sounds great.
Back to my BBK project, I just bought an used acorn 12x1.5 Gorilla wheel lock off ebay.
I also want to install BBK ASAP but I need tires w/o burning my wallet. Anyone has coupon code from www.onlinetires.com?
#15
Lexus Champion
Thread Starter
Got a set of new Gorilla wheel lock off ebay. Now I just need tires to complete my BBK project.
TRD BBK shown at an auto show I attended this weekend. Very similiar design, two piece, stainless steel brake line. Only difference for TRD BBK's rotor is slotted and SS brake line does not look clear plastic "shrink wrapped".
TRD Coilover, you can see the back side of TRD BBK also.
TRD BBK shown at an auto show I attended this weekend. Very similiar design, two piece, stainless steel brake line. Only difference for TRD BBK's rotor is slotted and SS brake line does not look clear plastic "shrink wrapped".
TRD Coilover, you can see the back side of TRD BBK also.