2010-2014 Interior lighting LED conversion
#61
Driver School Candidate
Join Date: May 2016
Location: California
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
You do know the LED replacement bulbs are polarity sensitive?
Try flipping the LED replacement bulb over, in other words if it doesn't come inserted one way, then reverse it.
Try flipping the LED replacement bulb over, in other words if it doesn't come inserted one way, then reverse it.
#63
Driver School Candidate
Join Date: May 2016
Location: California
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone tried this company? The bulbs are hella cheaper than VLED. Details say they're 5500-6000K.
http://www.ledpartsnow.com/1015RX/
Thanks!
http://www.ledpartsnow.com/1015RX/
Thanks!
T
#64
Driver School Candidate
Join Date: Mar 2015
Location: CA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
If I wanted to do the entire conversion but with some lights being a little less bright, which lumen output should I go for? For example, I want the front dome light to be bright just not VERY bright like this one.
#65
Intermediate
I installed these in the 4Runner and will be moving the ones I can to the RXh. They are very good quality and the 3014 series is a brighter bulb than the 5050 that most places sell.
http://www.ebay.com/itm/15pc-3014-Se...MAAOSwAYtWOPb1
http://fyreflys.com/
http://www.ebay.com/itm/15pc-3014-Se...MAAOSwAYtWOPb1
http://fyreflys.com/
#66
I just had 2 red 194 VLEDS for the taillights go out, in both of them the connectors seem to have gotten loose and i can get them to turn on for a brief second if I wiggle them. Also in one of them 2 leds were out. I'm kind of disappointed in this and i just found out its a one year warranty from June 2015. These aren't cheap, I'll see what they can do.
#67
Pole Position
Thread Starter
I just had 2 red 194 VLEDS for the taillights go out, in both of them the connectors seem to have gotten loose and i can get them to turn on for a brief second if I wiggle them. Also in one of them 2 leds were out. I'm kind of disappointed in this and i just found out its a one year warranty from June 2015. These aren't cheap, I'll see what they can do.
#68
Yeah I thought the same thing (odd that they both got loose at similar times). I have managed to get one of them back on but they don't seem to fit as snug as before so now I have one that won't fit properly. I think it may have something to do with the colder temperature at night. If they are aluminum it might make sense.
#69
Driver School Candidate
Join Date: Nov 2016
Location: Ontario
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
New member here: quick question, is there any Alternative to vleds for us folks here in Canada?
or a cheaper alternative to vled worldwide. $200+ usd seems a bit too much T_T
thanks
or a cheaper alternative to vled worldwide. $200+ usd seems a bit too much T_T
thanks
#70
Great Deal Guru
iTrader: (5)
.............
Did the entire inside of our 2013 RX350 not one issue and they are very bright. I also have these on my IS350 for over 4 years!
http://www.ebay.com/itm/361422971373
#71
Driver School Candidate
Join Date: Nov 2016
Location: Ontario
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I got mine from ebay 13 pcs for $6.94 shipped!
Did the entire inside of our 2013 RX350 not one issue and they are very bright. I also have these on my IS350 for over 4 years!
http://www.ebay.com/itm/361422971373
Did the entire inside of our 2013 RX350 not one issue and they are very bright. I also have these on my IS350 for over 4 years!
http://www.ebay.com/itm/361422971373
does that cover all of the interior light and puddle light? ...
I also noticed that when i turn on my low beams . there is another small light on top of it .. its kind of yellow ish color. just about the HID low beam . still part of the headlight lense
#72
Great Deal Guru
iTrader: (5)
............
Nice, thanks, maybe i'll try that one
does that cover all of the interior light and puddle light? ...
I also noticed that when i turn on my low beams . there is another small light on top of it .. its kind of yellow ish color. just about the HID low beam . still part of the headlight lense
does that cover all of the interior light and puddle light? ...
I also noticed that when i turn on my low beams . there is another small light on top of it .. its kind of yellow ish color. just about the HID low beam . still part of the headlight lense
#73
I just bought and installed most of the parts using the ledpartsnow kit for a 2015.
For the most part it works great.
Key Points:
The kit I got consists of:
Pretty much looks like the greeknasty's picture
The replacement LEDs are a little long (30mm or so). So for the door lights, the top smd gets squished up against the plastic shield, but works.
I tried the vanity lights, but to be honest the color rendition is not good (with these and actually any of these small LED). It will make you look pale and sick versus the warm yellow of the incandescent. I would recommend if you actually intend to use the vanity to look at a human face to stick with incandescent.
Problem with the rear dome. The standard is too long to fit in the rear dome, so I reordered a low profile and a flank from vleds to see if it would fit. Perhaps I was supposed to use normals for the footwell, and save the short one for rear dome.
Will tackle the puddle lights another day.
For the most part it works great.
Key Points:
The kit I got consists of:
- 3 festoon type for the cargo (had to bend a bit as noted above)
- 2 low profile shorter 1smd front facing LED
- 12 of their "regular" 5smd 360degree bulbs (30mm)
- 3 festoon for cargo
- 2 low profiles for the footwells
- 8 regular
- 2 front dome
- 4 door
- 2 reverse lights
- (2 reserved for) puddle lights postponed
- 2 spare for vanity
Pretty much looks like the greeknasty's picture
The replacement LEDs are a little long (30mm or so). So for the door lights, the top smd gets squished up against the plastic shield, but works.
I tried the vanity lights, but to be honest the color rendition is not good (with these and actually any of these small LED). It will make you look pale and sick versus the warm yellow of the incandescent. I would recommend if you actually intend to use the vanity to look at a human face to stick with incandescent.
Problem with the rear dome. The standard is too long to fit in the rear dome, so I reordered a low profile and a flank from vleds to see if it would fit. Perhaps I was supposed to use normals for the footwell, and save the short one for rear dome.
Will tackle the puddle lights another day.
#74
Moderator
I know most of you did the conversion a while back.
Do still remember the soft on feature of the filament bulb? LEDs dont turn on till the voltage reaches 'ON' voltage .. so I imagine when you hit the switch, for a brief time they remain off and then bam the LED comes on full brightness.
Salim
Do still remember the soft on feature of the filament bulb? LEDs dont turn on till the voltage reaches 'ON' voltage .. so I imagine when you hit the switch, for a brief time they remain off and then bam the LED comes on full brightness.
Salim
#75
Driver School Candidate
Join Date: Aug 2013
Location: France
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
I've used this kind of leds in my rx450h, 24, 36 and 48smd models ( from 2 to 4w)
http://www.ebay.com/itm/48-SMD-COB-L...pXBKNB&vxp=mtr
Cheap, very bright, . It fits in most interior lights location, it turns on and off progressively. Not as much as bulb lights but not so bad
http://www.ebay.com/itm/48-SMD-COB-L...pXBKNB&vxp=mtr
Cheap, very bright, . It fits in most interior lights location, it turns on and off progressively. Not as much as bulb lights but not so bad