RX - 3rd Gen (2010-2015) Discussion topics related to the 2010 - 2015 RX350 and RX450H models

2010-2014 Interior lighting LED conversion

Old 05-16-15, 12:45 PM
  #31  
CanadianRX
Pit Crew
 
CanadianRX's Avatar
 
Join Date: Aug 2012
Location: Ontario
Posts: 189
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by vince22
Yes, still works

Has anyone changed the rear lights out. The ones that come on when your lights are on. In the 2013-2015 it's the bulbs that produce that red line on the taillights.
Old 05-17-15, 11:19 PM
  #32  
justin1203
Pit Crew
 
justin1203's Avatar
 
Join Date: Jan 2012
Location: PA
Posts: 171
Received 4 Likes on 4 Posts
Thumbs up

Originally Posted by vince22
Yes, still works
Hi Vince,

Where did you get your blue footwell lights? Look awesome!
Old 05-19-15, 03:03 AM
  #33  
CanadianRX
Pit Crew
 
CanadianRX's Avatar
 
Join Date: Aug 2012
Location: Ontario
Posts: 189
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by justin1203
Hi Vince,

Where did you get your blue footwell lights? Look awesome!
I searched vleds and they had a blue version of the 194 light. I'm guessing thats what was used.
Old 05-19-15, 07:02 AM
  #34  
vince22
Intermediate
 
vince22's Avatar
 
Join Date: Jun 2009
Location: ca
Posts: 257
Received 6 Likes on 5 Posts
Default

Originally Posted by justin1203
Hi Vince,

Where did you get your blue footwell lights? Look awesome!
yes from vleds ....
http://www.vleds.com/shop-bulb-numbe...58-1-pair.html
Old 05-20-15, 06:58 PM
  #35  
CanadianRX
Pit Crew
 
CanadianRX's Avatar
 
Join Date: Aug 2012
Location: Ontario
Posts: 189
Likes: 0
Received 1 Like on 1 Post
Default

Installed a few today, I would have to say the overhead dome lights might be a bit too bright. I will have to see if I get used to it but I might recommend going down a notch for them. I also did the blue footwells, hatch/trunk lights and reverse lights.

Does anyone know the which Vleds would be good for the turn signal and parking lights? Here are a few pics.






the door light now matches the Lexus door sill

Last edited by CanadianRX; 05-20-15 at 07:36 PM.
Old 05-21-15, 01:33 AM
  #36  
roy7777
Pit Crew
 
roy7777's Avatar
 
Join Date: Jun 2012
Location: California
Posts: 126
Received 13 Likes on 10 Posts
Default

Originally Posted by CanadianRX
Has anyone changed the rear lights out. The ones that come on when your lights are on. In the 2013-2015 it's the bulbs that produce that red line on the taillights.
They are 168/194 which are the same as the 2 red lights on rear bump.
It's interesting that there is no warning light on when we switch to LED bulb.

Last edited by roy7777; 05-21-15 at 01:38 AM.
Old 05-21-15, 03:16 AM
  #37  
kitlz
No, I don't play soccer!
 
kitlz's Avatar
 
Join Date: Jul 2009
Location: NJ
Posts: 6,652
Received 159 Likes on 134 Posts
Default

Nice job, CanadianRX. The blue looks soothing. You'll get used to the brightness of the dome light. For the turn signals I have a combination of Stealth and Philips Superchrome. They eliminate the orange glow but look identical to OEM when on. An installer changed out the parking lights for me. I didn't get them from VLEDS.
Old 05-21-15, 10:56 AM
  #38  
CanadianRX
Pit Crew
 
CanadianRX's Avatar
 
Join Date: Aug 2012
Location: Ontario
Posts: 189
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by roy7777
They are 168/194 which are the same as the 2 red lights on rear bump.
It's interesting that there is no warning light on when we switch to LED bulb.
Thanks! What about the rear amber blinker light?
Old 05-21-15, 10:57 AM
  #39  
CanadianRX
Pit Crew
 
CanadianRX's Avatar
 
Join Date: Aug 2012
Location: Ontario
Posts: 189
Likes: 0
Received 1 Like on 1 Post
Default

Yeah the blue is really nice. Thanks for the inspiration!
Originally Posted by kitlz
Nice job, CanadianRX. The blue looks soothing. You'll get used to the brightness of the dome light. For the turn signals I have a combination of Stealth and Philips Superchrome. They eliminate the orange glow but look identical to OEM when on. An installer changed out the parking lights for me. I didn't get them from VLEDS.
Old 05-21-15, 04:20 PM
  #40  
roy7777
Pit Crew
 
roy7777's Avatar
 
Join Date: Jun 2012
Location: California
Posts: 126
Received 13 Likes on 10 Posts
Default

Originally Posted by CanadianRX
Thanks! What about the rear amber blinker light?
The rear turn signal light bulb is 7440A. (A for amber I guess)
If you want to switch to LED, you will need to install resistors to prevent hyper flash.
And, most amber 7440 LEDs on amazon and ebay are barely seen under the sunlight.
Old 05-25-15, 09:02 PM
  #41  
CanadianRX
Pit Crew
 
CanadianRX's Avatar
 
Join Date: Aug 2012
Location: Ontario
Posts: 189
Likes: 0
Received 1 Like on 1 Post
Default

Ordered some v3s from vled for the blinkers. Finally completed the puddle lights, easier than I thought it would be due to the great write ups. 15-20 min per side. One tip for others when removing the trunk lights and lower door, the side you want to slide your card in is the right side of the housing. That is the location of the clip you need to hit, they pop right out. Did 7 lights in 20 min. I'll try the rear dome soon.

[QUOTE=roy7777;9048448]The rear turn signal light bulb is 7440A. (A for amber I guess)
If you want to switch to LED, you will need to install resistors to prevent hyper flash.
Old 10-24-15, 02:48 PM
  #42  
LONGSHORE
Driver School Candidate
 
LONGSHORE's Avatar
 
Join Date: Sep 2015
Location: CA
Posts: 21
Received 1 Like on 1 Post
Default

Thank you greeknasty and all who took the time composing this write up. I'm looking forward to receiving my order and installing these myself. I'm a new owner of a 2015 450h. After this install I'll be considering a HID headlight upgrade.

Mikey
Old 01-02-16, 10:01 PM
  #43  
XOPRESENTS
Driver School Candidate
 
XOPRESENTS's Avatar
 
Join Date: Feb 2012
Location: California
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

Sorry for bringing this thread back from the grave, need some help with replacing the license plate lights. I searched the forum but no luck. Any help would be greatly appreciated

Cheers,

Ron
Old 01-03-16, 04:59 AM
  #44  
greeknasty
Pole Position
Thread Starter
 
greeknasty's Avatar
 
Join Date: Nov 2013
Location: nc
Posts: 329
Likes: 0
Received 9 Likes on 9 Posts
Default

Originally Posted by XOPRESENTS
Sorry for bringing this thread back from the grave, need some help with replacing the license plate lights. I searched the forum but no luck. Any help would be greatly appreciated

Cheers,

Ron
Not a simple bulb switch and many go to the dealer for this. What would you like to swap them out for? Brighter? Different light? Most people just leave them since they are a pain
Old 01-03-16, 10:44 AM
  #45  
CanadianRX
Pit Crew
 
CanadianRX's Avatar
 
Join Date: Aug 2012
Location: Ontario
Posts: 189
Likes: 0
Received 1 Like on 1 Post
Default

Aren't the license plate lights LED already?

Originally Posted by greeknasty
Not a simple bulb switch and many go to the dealer for this. What would you like to swap them out for? Brighter? Different light? Most people just leave them since they are a pain

Thread Tools
Search this Thread
Quick Reply: 2010-2014 Interior lighting LED conversion



All times are GMT -7. The time now is 09:18 AM.