I am looking for help with my anti theft system..
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2014
Location: nv
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I am looking for help with my anti theft system..
I just recently installed a subwoofer in my 2003 lexus rx300. I wasnt aware that there was a security code. I know now that there is a way to enter the key code as if I was just changing the battery and it locked the stereo, but i dont know the steps involved. Could anyone list the steps for entering the key code to unlock my stereo please? thank you for any information you may have!
#2
Try this:
Turn the ignition switch on.
Press the power button on the radio.
Press and hold preset button number 1.
Press and hold the "Tune up" button.
Release both buttons when "---" appears in the display.
Press the numbered preset buttons to enter the unlock code. The radio powers down when the last digit of the code is entered.
Press the power button on the radio. The radio unlocks as it turns on.
Turn the ignition switch on.
Press the power button on the radio.
Press and hold preset button number 1.
Press and hold the "Tune up" button.
Release both buttons when "---" appears in the display.
Press the numbered preset buttons to enter the unlock code. The radio powers down when the last digit of the code is entered.
Press the power button on the radio. The radio unlocks as it turns on.
#3
I just recently installed a subwoofer in my 2003 lexus rx300. I wasnt aware that there was a security code. I know now that there is a way to enter the key code as if I was just changing the battery and it locked the stereo, but i dont know the steps involved. Could anyone list the steps for entering the key code to unlock my stereo please? thank you for any information you may have!
#4
Driver School Candidate
Join Date: Dec 2020
Location: Ohio
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Need radio code
Try this:
Turn the ignition switch on.
Press the power button on the radio.
Press and hold preset button number 1.
Press and hold the "Tune up" button.
Release both buttons when "---" appears in the display.
Press the numbered preset buttons to enter the unlock code. The radio powers down when the last digit of the code is entered.
Press the power button on the radio. The radio unlocks as it turns on.
Turn the ignition switch on.
Press the power button on the radio.
Press and hold preset button number 1.
Press and hold the "Tune up" button.
Release both buttons when "---" appears in the display.
Press the numbered preset buttons to enter the unlock code. The radio powers down when the last digit of the code is entered.
Press the power button on the radio. The radio unlocks as it turns on.
. Regards
S.King
Cleveland Collectables
#5
Lexus Test Driver
Have a 04 RX-330 and we took the radio out to redo the dash. I did not know i had to put it in a certain mode now the radio is not working after re-install. Someone please explain how to get it working again. The radio has wierd symbols on the screen and doesnt even show the time right now.
. Regards
S.King
Cleveland Collectables
. Regards
S.King
Cleveland Collectables
Maybe post a pic of what you are seeing?
My car 2004 RX330 too.
Thread
Thread Starter
Forum
Replies
Last Post