Replace your rear knuckle bushings with NEW OEM Bushings/Spherical Bearings
#16
I replace bushings but they were fine, not the cause of noise. My noise came from broken axle bearing and partly also from loose rusty alignment bolt. https://www.clublexus.com/forums/rx-...ment-bolt.html
Added picture of bolt that needed to replace, it had rusted.
Last edited by rns; 01-25-16 at 09:15 AM.
#20
And I had to grind it's surface too to make it fit, the diameter was slightly bigger.
Last edited by rns; 01-25-16 at 09:21 AM.
#25
I'm curious as to which FEBEST bushing was tried. There seems to be two different ones that can be used. The first one is much cheaper than the second ($11 vs $18). I'm curious if the second one is a newer style that's more reliable.
EDIT: It appears the one mentioned by rns is the second one, TAB-166Z.
EDIT: It appears the one mentioned by rns is the second one, TAB-166Z.
Last edited by RedGemini; 04-11-17 at 07:29 AM.
The following users liked this post:
Cjalbert1 (11-29-22)
#28
My particular RX350 was an AWD. I used the OEM bushing originally indicated at the start of this thread. This bushings are 42210-20010.
Last edited by nwjetboat1; 10-24-17 at 12:31 PM.
#29
Driver School Candidate
Join Date: Nov 2017
Location: NL
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Good day, I looking for the right rear lower knuckle bushing for my Lexus RX400h but my Toyota dealer says I can't buy the bushing alone I must buy the bushing and knuckle assembly together (Part # 42304-48051 ($558.60 CAD)). However, my mechanic says I should be able too buy the bushing separately. So, I guess I'm looking for a bushing for part number 42304-48051 (bushing and knuckle assembly). After reading this thread last night I'm hoping that Part # 42210-20010, identified here, will fit. Can someone please confirm that Part # 42210-20010 is the correct one. My dealer says it cost $97.17 CAD and only fits the Avalon and Celica. I would really appreciate it if someone could confirm. Thanks.
#30
Driver School Candidate
Hello all,
Please check my image and tell me if the given OEM bush will fix this area of bushing??? i believe marked area is called trailing arm bushing
Thank you
Last edited by anthonyini; 03-14-18 at 10:17 PM.