alchemist

iTrader: (1)

Did this tonight. Huge difference! Did this because tough at night to see backing up with tinted windows.

I used the 921 lights from V-LED. For those interested, follow instructions on removing plastic panel in VIPNiSS's thread:

https://www.clublexus.com/forums/rx-...led-bulbs.html

Obviously the difference is your removing the back up bulbs not the license plate bulbs...

Sorry for crappy pics, iphone doesn't work well at night.



Driver side changed. Passenger side stock...









Both changed...

Sh1nra

Nice!
Those look extremely bright. I'd hate to be behind you when you are parallel parking Lol.

SaneEnch

Did you have to add balancers? I tried this with LED (not the same as your) last year and the broken exterior light constantly popping up in the dashboard. Later I learned I need balancers for them. It appears that the one you have does not.

Do you experience any similar issue? If not, can you provide a link as to where you purchase these blubs? Thanks!

imherenow

just wondering how it is during the day.

alchemist

iTrader: (1)

No balancers needed. Direct swap only.

Not sure during the day. Wasnt concerned about their day performance but really needed them at night.

malso70

where did you buy it so i can buy because i brought one and it keep the dash light on like if it was burned

alchemist

iTrader: (1)

Not sure if I can hotlink because I dont know if they are a vendor but you can google VLEDs

ycl1688

look for your vehicle on left panel. make sure you ask for short one, if too long
it will not fit, specially the rare lights. these are called CANBUS meaning no error, it is resistor on its own.
http://www.superbrightleds.com/cat/l...FapAMgodiFwAcA

StLucchese

This made me laugh way to loud!. I will think about doing the upgrade as well...

JProdun

Did the visibility at night improve?

alchemist

iTrader: (1)

yes big time. and we are tinted all the way around so I definitely needed them. the whole reason was for night.

stevies30

If you're behind him when he's parallel parking aren't you just sitting still in your car? Close your eyes, lol.

JProdun

Alchemist,

I got the bulbs, tried to replace, but damn... those are so tight and my hands can't get a good grip to move them I don't have big hands, but I guess they are still big for lexus Any advice on pulling the old ones out? Or were you able to do it easily?

I'm assuming mine were never changed before...

alchemist

iTrader: (1)

Try some needle nose pliers but gently. If you are referring to pulling them out of the housing - then use some pliers - they twist then pull right out. Mine were tight as well. If you're referring to the actual bulb, those come out easy.

JProdun

Used pliers, worked like magic! Thank you!

I also bought the 921s from vleds, did yours fit back in the housing alright? Mine seem be a bit too big, did fit though...