RX330/350/400h DIY's (please help nominate links!)
The following users liked this post:
turbojarhe (05-09-24)
#49
How to R&R the Serpentine Belt Tensioner?
My serpentine belt tensioner pully is beginning to make a lot of noise. I changed the rear idle pulley thinking that was it, but it wasn't.
Has anyone posted a DIY for tensioner remove/replace? I can't seem to find it. Please paste a link if you have one.
Thanks . . . .
Has anyone posted a DIY for tensioner remove/replace? I can't seem to find it. Please paste a link if you have one.
Thanks . . . .
#50
A member here is looking for a thread I recommended which I can't find, if anyone can help.
It was a full thread about resetting all the features that revert to default once you switch the battery...Such as moonroof alignment, power window controls, etc.
I was hoping it would be here and think it should as it's very valuable.
Thank you in advance.
It was a full thread about resetting all the features that revert to default once you switch the battery...Such as moonroof alignment, power window controls, etc.
I was hoping it would be here and think it should as it's very valuable.
Thank you in advance.
#51
Driver School Candidate
Join Date: Aug 2016
Location: Russia
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hi everyone! I'm a new member on this forum.
Does nymody know where I can get ECU firmware for my RX330 2004? Dump of ECU is 89663-48182.
Great thanks for any help and links!
Does nymody know where I can get ECU firmware for my RX330 2004? Dump of ECU is 89663-48182.
Great thanks for any help and links!
#54
Lexus Test Driver
HELLO CLUB LEXUS!
Been reading thru the threads and I can't seem to find a DIY for this... Can someone point me in the right direction? OK so I was vacuuming my jeep and the fuse must've blown to the power outlets. I looked in the engine bay fuse box and seen that the fuse for POWER OUTLET NO2 still looks intact. I haven't changed it yet ima go soon to the store..... But just incase it's not that fuse responsible for both outlets.... Where is the fuse box for these outlets located??? I'm hands on. I'm just tryna determine what the exact problem is. Any help is deeply and kindly appreciated! GodBless!
Been reading thru the threads and I can't seem to find a DIY for this... Can someone point me in the right direction? OK so I was vacuuming my jeep and the fuse must've blown to the power outlets. I looked in the engine bay fuse box and seen that the fuse for POWER OUTLET NO2 still looks intact. I haven't changed it yet ima go soon to the store..... But just incase it's not that fuse responsible for both outlets.... Where is the fuse box for these outlets located??? I'm hands on. I'm just tryna determine what the exact problem is. Any help is deeply and kindly appreciated! GodBless!
#55
2006 RX330 Liftgate Lock Actuator Repair
2006 RX330 Liftgate Lock Actuator Repair
Dealership will sell the lock actuator assembly around $281 and $211 you can buy from online shop. a used item you can also buy from ebay if IT IS the right parts,
but a $5-$7 motor may well save the whole thing!
Both says are fit for 2004-2009 RX330 or RX350, but quite different of mine, maybe both are redesigned one?
Dealership will sell the lock actuator assembly around $281 and $211 you can buy from online shop. a used item you can also buy from ebay if IT IS the right parts,
but a $5-$7 motor may well save the whole thing!
Both says are fit for 2004-2009 RX330 or RX350, but quite different of mine, maybe both are redesigned one?
The following users liked this post:
Geemaan (08-10-21)