RX - 2nd Gen (2004-2009) Discussion topics related to the 2004 -2009 RX330, RX350 and RX400H models

Rear quarter window exterior molding fell off RX330

Thread Tools
 
Search this Thread
 
Old 06-06-16, 08:05 AM
  #166  
automedic
Driver School Candidate
 
automedic's Avatar
 
Join Date: Nov 2013
Location: California
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default


here are your choices you can go to the dealer pay $184.00 for the whole window because you cant buy the trim separate from the dealer plus $125,00 to install or you can buy just the window with the trim for $120.00 on e bay but have to get it installed at a window shop for around $80.00 this is the only other option to solve your problem

There is an alternative you can buy the separate trim piece on amazon or e bay


Here is the link to the instructional video that show how to install it hope this helps





Old 01-13-17, 11:27 AM
  #167  
automedic
Driver School Candidate
 
automedic's Avatar
 
Join Date: Nov 2013
Location: California
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default found a replacement trim on amazon and e bay for cheap

Its about time!!!! a replacement trim that can be installed on the existing window saving you time and a lot of money, I went to the dealership they wanted $186.30 for the whole window plus $125.00 in Labor to install it because they send it out to a glass shop add the with tax its way over
$300 bucks, I found these on e bay and installed them on my RX went on easy after following the instruction video

there is a video on YOU TUBE showing how it is installed

here is the link
Old 04-18-18, 01:45 PM
  #168  
rc72
Driver School Candidate
 
rc72's Avatar
 
Join Date: Jan 2018
Location: texas
Posts: 8
Received 0 Likes on 0 Posts
Default

I had the same issue. Mine flew away as I was driving on the highway. I was think about replacing it with this
Amazon Amazon
Old 04-18-18, 04:34 PM
  #169  
mylexbaby
Driver
 
mylexbaby's Avatar
 
Join Date: Mar 2015
Location: California
Posts: 142
Received 22 Likes on 18 Posts
Default

Or maybe this from Amazon?

Old 06-24-20, 08:38 AM
  #170  
TCB
10th Gear
 
TCB's Avatar
 
Join Date: Jun 2020
Location: Ohio
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default 2004 RX 330 Rear window trim

I have a 2004 Lexus RX 330 with 144,000 miles on it I was driving home last night on the highway in my rear passenger side window trim came loose. I read your thread that you reinstalled yours using silicone can you tell me if it’s still holding up today.

Thank you,
Old 06-24-20, 09:02 AM
  #171  
cdnewton
Advanced
 
cdnewton's Avatar
 
Join Date: Aug 2002
Location: Colorado, USA
Posts: 607
Received 84 Likes on 70 Posts
Default

There are some great options in this thread; I used silicone for the repair on our 2004 Lexus RX330 and it is still holding fine.
Old 06-24-20, 10:24 AM
  #172  
TCB
10th Gear
 
TCB's Avatar
 
Join Date: Jun 2020
Location: Ohio
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default 2004 RX 330 rear window trim

Originally Posted by cdnewton
There are some great options in this thread; I used silicone for the repair on our 2004 Lexus RX330 and it is still holding fine.
I went to a glass company called Glass America here in Ohio. I’m taking my RX 330 this Saturday to have both rear window trim glued on. I will post how it went.

Old 06-24-20, 01:25 PM
  #173  
iMSQ
Instructor
 
iMSQ's Avatar
 
Join Date: Aug 2018
Location: NM
Posts: 999
Received 220 Likes on 187 Posts
Default

These moldings are badly designed - rear doors impact them while opening, and "unmount" them as a result.
My right molding has broken while driving on a highway, so I unmount the left one due to not lose it also ($80 at eBay is too expensive for a piece of plastic).
Old 06-24-20, 02:16 PM
  #174  
TCB
10th Gear
 
TCB's Avatar
 
Join Date: Jun 2020
Location: Ohio
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default RX 330 rear window trim

Like I said, my passenger side rear window trim came loose yesterday while I was on the highway. I took it completely off once I got home. Today I went to a local car window repair company called Glass America. The manager looked at the trim and said he can epoxy it back on. I’m scheduled to take my 2004 RX 330 in this Saturday. In the meantime, I noticed my driver side rear trim was loose as well. So, I took that trim completely off. The hard work is in the preparation. Getting all the old tape off and cleaning the surfaces. I will post before and after pictures and the total cost.

Last edited by TCB; 06-24-20 at 02:17 PM. Reason: Misspelled word
Old 06-25-20, 07:20 AM
  #175  
TCB
10th Gear
 
TCB's Avatar
 
Join Date: Jun 2020
Location: Ohio
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default 2004 RX 330 rear window trim

Like I said, my passenger side rear window trim came loose yesterday while I was on the highway. I took it completely off once I got home. Today I went to a local car window repair company called Glass America. The manager looked at the trim and said he can epoxy it back on. I’m scheduled to take my 2004 RX 330 in this Saturday. In the meantime, I noticed my driver side rear trim was loose as well. So, I took that trim completely off. The hard work is in the preparation. Getting all the old tape off and cleaning the surfaces. I will post before and after pictures and the total cost.
Old 06-27-20, 08:28 AM
  #176  
TCB
10th Gear
 
TCB's Avatar
 
Join Date: Jun 2020
Location: Ohio
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by cdnewton
There are some great options in this thread; I used silicone for the repair on our 2004 Lexus RX330 and it is still holding fine.
I took my 2004 Lexus RX 330 to Glass America today and the manager put a bead of Urethane on both rear window trim. For $40 the problem was solved and I saved $700.
Old 06-27-20, 08:32 AM
  #177  
cdnewton
Advanced
 
cdnewton's Avatar
 
Join Date: Aug 2002
Location: Colorado, USA
Posts: 607
Received 84 Likes on 70 Posts
Default

Years ago when I fixed mine and talked with Safelite, they mentioned a product other than silicone and it must have been what you used. Thanks for the feedback.
Old 06-27-20, 08:46 AM
  #178  
TCB
10th Gear
 
TCB's Avatar
 
Join Date: Jun 2020
Location: Ohio
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by cdnewton
Years ago when I fixed mine and talked with Safelite, they mentioned a product other than silicone and it must have been what you used. Thanks for the feedback.
I’m glad I was able to get mine fixed for such a cheap price, plus I know it was done right and it will not fall off or come loose in the future. Thank you for leading me in the right direction. Hope this can benefit other Lexus owners.

TCB
Old 07-21-20, 08:00 AM
  #179  
Chicagojoe
Driver School Candidate
 
Chicagojoe's Avatar
 
Join Date: Nov 2004
Location: Illinois
Posts: 12
Received 4 Likes on 2 Posts
Default

Originally Posted by TCB
I have a 2004 Lexus RX 330 with 144,000 miles on it I was driving home last night on the highway in my rear passenger side window trim came loose. I read your thread that you reinstalled yours using silicone can you tell me if it’s still holding up today.

Thank you,
Our is also still holding up well.
Old 07-23-20, 01:49 AM
  #180  
ThomasD94
Pit Crew
 
ThomasD94's Avatar
 
Join Date: Feb 2019
Location: Scotland
Posts: 190
Received 77 Likes on 48 Posts
Default

mine fell off too!


Quick Reply: Rear quarter window exterior molding fell off RX330



All times are GMT -7. The time now is 04:15 AM.