Lexus RX330/350/400h LED Turn Signal Mirror
#16
I wish I'm in SCAL and get Tommy to do the install instead of waiting for the Lexus service tech taking his sweet time and not calling Tommy on wiring and get it done.
I will take a picture of the full car once I have my passenger side mirror replace, when I got my CPO 06' 400H, that mirror was broken before and the dealer used Epoxy glue to held it together. They were stupid enough to sign a certificate that the dealer's managers did interior and exterior inspections and found no flaws, I busted them and made them replace the entire assembly or I will raise some hell when I call Lexus corporate.
I will take a picture of the full car once I have my passenger side mirror replace, when I got my CPO 06' 400H, that mirror was broken before and the dealer used Epoxy glue to held it together. They were stupid enough to sign a certificate that the dealer's managers did interior and exterior inspections and found no flaws, I busted them and made them replace the entire assembly or I will raise some hell when I call Lexus corporate.
#19
Driver
iTrader: (7)
I have just barely installed mine this pass weekend and everything is working on it.. all the lights are working perfectly. I even got the puddle lights to come on when you unlock the car door. Feel free to PM me with any question, I'll be more then happy to help. Also thanks Nigel love the product the paint job on it couldn't be any better.
#20
I have just barely installed mine this pass weekend and everything is working on it.. all the lights are working perfectly. I even got the puddle lights to come on when you unlock the car door. Feel free to PM me with any question, I'll be more then happy to help. Also thanks Nigel love the product the paint job on it couldn't be any better.
Thanks a lot and I appreciate it!!
#22
PICS and DIY would be great! Then we can all order ours!!!!
#23
Driver
iTrader: (7)
I didnt take any pic because my gf had the camera at the time but there is a DIY already up if you search for it.. i followed that for the most part and if any of you guys do get stuck or have question feel free to shoot me a PM. I'll try to take some pics tonight and post them up for you guys. It doesnt come with any instructions but its not hard at all.. took me 4 hours to do. But I was messing around with other stuff on my F so yea.. haha
#24
Driver
iTrader: (7)
Here are some pics. I didn't take any of the turn signal light on, I'm pretty sure most of ya'll seen it already. But here are some pics with the puddle light on.. It's pretty bright and comes on only when you unlock the car or when you have the door open and your doors sille are on. ENJOY
#29
I finally got hold of my friend, with his help we was able to finish the install
puddle light
passenger side door notice I did not use the supplied plug, instead button up.
Led turn signal finally working
Thank you to kwik801 for giving us the feedback on where to tab power for puddle light
power to the puddle light came from door sills so when you disarm your car, the puddle will light up along with the factory dome light.
Everything is grounded properly (both negative from the turn signal wire & single puddle light
negative, passenger side puddle light was grounded on passenger side for obvious reason)
It's weird, it turns out my left turn signal is the yellow wire and right turn signal is the white wire and not as mention in most DIYs, green and black (use multimeter to test and confirm
before tapping wire)
video link
puddle light
passenger side door notice I did not use the supplied plug, instead button up.
Led turn signal finally working
Thank you to kwik801 for giving us the feedback on where to tab power for puddle light
power to the puddle light came from door sills so when you disarm your car, the puddle will light up along with the factory dome light.
Everything is grounded properly (both negative from the turn signal wire & single puddle light
negative, passenger side puddle light was grounded on passenger side for obvious reason)
It's weird, it turns out my left turn signal is the yellow wire and right turn signal is the white wire and not as mention in most DIYs, green and black (use multimeter to test and confirm
before tapping wire)
video link
Last edited by mowmow; 07-20-09 at 11:21 AM.
#30
Where's the complete DIY!!!! Come on!!