Lexus 3500Ib tow hitch
#46
Driver School Candidate
Pinggolf,
Do you have the tow package but just didn't have the hitch? If not, did you buy the converter or did the lights just work? I too would like to install the hitch but as my '07 is used I don't know if it has the tow package. Does anyone know a way to check if the tow package is installed?
Thanks
Do you have the tow package but just didn't have the hitch? If not, did you buy the converter or did the lights just work? I too would like to install the hitch but as my '07 is used I don't know if it has the tow package. Does anyone know a way to check if the tow package is installed?
Thanks
#47
Driver School Candidate
Join Date: Sep 2009
Location: AL
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I installed my OEM hitch about 2 months ago. I haven't used it yet but it was simple to install and I have had no problems. I hope to return with an update that says the lights on the trailer work perfect.... For now all I can say is my 06 RX400H has the tow hitch wiring installed from the factory. All I had to do was plug in the harness!!
#48
Driver School Candidate
Join Date: Aug 2009
Location: VA
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
I have just installed an OEM hitch and my lights did not work! I have searched and read about a driver module??? I also have posted a new thread hoping to find out what this is and does.
Why would Lexus install the plug, so you naturally plug in the harness you got with the hitch and find out they make it non-functioning from the factory?
The parts business and the nickel and dime stuff drives me nutts!
Why would Lexus install the plug, so you naturally plug in the harness you got with the hitch and find out they make it non-functioning from the factory?
The parts business and the nickel and dime stuff drives me nutts!
#49
Driver School Candidate
Join Date: Sep 2009
Location: AL
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I have just installed an OEM hitch and my lights did not work! I have searched and read about a driver module??? I also have posted a new thread hoping to find out what this is and does.
Why would Lexus install the plug, so you naturally plug in the harness you got with the hitch and find out they make it non-functioning from the factory?
The parts business and the nickel and dime stuff drives me nutts!
Why would Lexus install the plug, so you naturally plug in the harness you got with the hitch and find out they make it non-functioning from the factory?
The parts business and the nickel and dime stuff drives me nutts!
#50
Quick question. I noticed most posters orderd their OEM hitch packages from lexuspartsonline.com? Sewel is one of CL's vendors and has anyone ordered from them? Or should I just order from lexuspartsonline? Only reason I am asking is that I have had good service from Sewel recommended from this site.
#51
Driver School Candidate
Join Date: Mar 2010
Location: Saskatchewan
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
connecting 4 way flat molded connector
04 Lexus RX 330
The local Lexus dealer wanted $90 for the trailer wiring harness so I went out and purchased a 4 way flat molded universal harness $12 and connected it myself.
Follow Campbell's instructions and find the wiring harness in the rear compartment. The plug will have 4 wires - white(ground), Green(right turn/stop), yellow(left turn/stop), Blue(taillight/license/side marker. If you have a test light check them to verify the condition by clipping the alligator clip to a good grounding point on the chassis or to the white wire and then individually to each wire when in operating mode eg. green when signaling left or applying the brake.
Once you confirm working condition go ahead and make the connections, either splice into the wires using automotive wiring connectors or if you are handy at all simply solder to each wire the following:
Lexus plug white -- white ground 4-way connector
Lexus plug blue -- brown taillight/license/side marker 4-way connector
Lexus plug green -- green right turn signal/stop light 4 way connector
Lexus plug yellow -- yellow left turn signal/stop light 4 way connector
I didn't mount the plug to the hitch as corrosion tends to cause problems, simply drilled a hole in the left lower compartment and inserted a rubber grommet to protect the harness. When I connect the lights I extract the harness, make the connection and close the tailgate.
If you are unable to verify the working condition of the connection it may be possible the converter has not been installed. Thanks to Campbell for the excellent documentation. - cheers
The local Lexus dealer wanted $90 for the trailer wiring harness so I went out and purchased a 4 way flat molded universal harness $12 and connected it myself.
Follow Campbell's instructions and find the wiring harness in the rear compartment. The plug will have 4 wires - white(ground), Green(right turn/stop), yellow(left turn/stop), Blue(taillight/license/side marker. If you have a test light check them to verify the condition by clipping the alligator clip to a good grounding point on the chassis or to the white wire and then individually to each wire when in operating mode eg. green when signaling left or applying the brake.
Once you confirm working condition go ahead and make the connections, either splice into the wires using automotive wiring connectors or if you are handy at all simply solder to each wire the following:
Lexus plug white -- white ground 4-way connector
Lexus plug blue -- brown taillight/license/side marker 4-way connector
Lexus plug green -- green right turn signal/stop light 4 way connector
Lexus plug yellow -- yellow left turn signal/stop light 4 way connector
I didn't mount the plug to the hitch as corrosion tends to cause problems, simply drilled a hole in the left lower compartment and inserted a rubber grommet to protect the harness. When I connect the lights I extract the harness, make the connection and close the tailgate.
If you are unable to verify the working condition of the connection it may be possible the converter has not been installed. Thanks to Campbell for the excellent documentation. - cheers
#53
Driver School Candidate
Join Date: Jan 2010
Location: WI
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Bought mine from Sewell online. No problems, fast shipping, and a piece of cake to install!
I did notice the prices for the hitch have jumped up quite a bit lately.
I did notice the prices for the hitch have jumped up quite a bit lately.
#57
Driver School Candidate
Join Date: Jan 2010
Location: pa
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
I need the paer number for the harness, come on people please help me, nobody knows in pa the part number at the dealers, please help me. I write, and write and nobody ansewers my ???
#58
http://www.factorylexusparts.com/servlet/StoreFront
http://www.lexuspartsonline.com/
http://www.trademotion.com/partlocat...08&catalogid=0
http://www.sewellpartsonline.com/par....asp?id=180654
http://www.lexuspartsmall.com/index.php
http://www.parts.com/oemcatalog/inde...cator&siteid=2)
or contact them with the question, or call a Lexus or Toyota dealer parts department.
Good luck!
#59
Driver School Candidate
Join Date: Jan 2010
Location: pa
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
i looked, and no luck for the factory plug in harness for the hitch. I don't wanna hack up my wires with a pepboys one, anyone that has the factory harness please call me 267-884-5477
#60