RX - 1st Gen (1999-2003) Discussion topics related to the 1999 -2003 RX300 models

so it begins...

Thread Tools
 
Search this Thread
 
Old 05-31-02, 05:12 PM
  #1  
StrmRdr23
Pole Position
Thread Starter
 
StrmRdr23's Avatar
 
Join Date: Jan 2002
Location: Washington
Posts: 333
Likes: 0
Received 0 Likes on 0 Posts
Default so it begins...

just did a test fit of my 20" lowenhart LS1s that i ordered from wheelexperts.com (they were recommended by CL in the wheels forum). the wheels are imported by dazz from what i understand and dazz assured us (wheelexperts and me) that these wheels would be direct bolt (20x9 +37) and if not, i had the option to return them. well, they don't fit! CRAP...they are about a half inch off...should i go ahead and try to run spacers? i don't want my ride lookin' like a skateboard with the rims sticking out hella...should i return them??? i'm not worried about returning them as peter from wheelexpert.com was very easy to work with when i was ordering the wheels and has had great communication with me...stay tuned...

Last edited by StrmRdr23; 05-31-02 at 05:26 PM.
Old 06-02-02, 02:33 AM
  #2  
spinteews
Lexus Test Driver
 
spinteews's Avatar
 
Join Date: Jul 2001
Location: California
Posts: 969
Likes: 0
Received 0 Likes on 0 Posts
Default

hrm, i dont know.. how does it look tho??

nice??

MAN!!! on Friday i was driving down a crowded chinatown like area in the city and i saw a rx300 with 20's on them.... LOOKED DAMN SWEET!!! It was riding kinda high and wheels flaring out

it was beautiful. But while i saw it spining, it looked as tho it was those rims that goes on LOW RIDERS... so i dunno... looked kinda funny, the rims itself, but the 20's and setup was sweet...

its all up to you. If the price was really good, spacers work out well, then keep it? if not then return it and get your money back

good luck man

try some pics =)
Old 06-03-02, 11:14 AM
  #3  
nerdspeed
Rookie
 
nerdspeed's Avatar
 
Join Date: May 2002
Location: CA
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
Default lowenhart's ... wow!

lowenhart's are sweet.... i can't wait to see your rx if you put those on... don't forget to post a pic!!!

i'm waiting on some $$$ so I can get myself some HRE's, got them picked out and even contacted HRE making sure it would go well with the RX. i just can't wait
Old 06-27-02, 03:00 PM
  #4  
StrmRdr23
Pole Position
Thread Starter
 
StrmRdr23's Avatar
 
Join Date: Jan 2002
Location: Washington
Posts: 333
Likes: 0
Received 0 Likes on 0 Posts
Default

ok, so finally got the credit for the lowenharts that i returned. used that credit towards my lsportline model IV 3pc in chrome . they should be here next week sometime. i'll take step by step pics - when i get the rims, when i get the tires, when i mount tires on the rims, when i mount the rims on the rx...let's hope this works...*crossing fingers* :eek:
Old 06-27-02, 03:03 PM
  #5  
spinteews
Lexus Test Driver
 
spinteews's Avatar
 
Join Date: Jul 2001
Location: California
Posts: 969
Likes: 0
Received 0 Likes on 0 Posts
Default

how much were those and how big? Does it fit perfecly with the rx3??
Old 06-27-02, 06:34 PM
  #6  
LexRX
RX 300 & 350Z Guru
 
LexRX's Avatar
 
Join Date: Feb 2001
Location: Georgia
Posts: 3,256
Likes: 0
Received 0 Likes on 0 Posts
Default

StrmRdr23, I hope, for you, that they work too! Good luck getting them and putting 'em on.
Old 06-28-02, 07:23 AM
  #7  
StrmRdr23
Pole Position
Thread Starter
 
StrmRdr23's Avatar
 
Join Date: Jan 2002
Location: Washington
Posts: 333
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks!

sprint - the rims are 20x8.5 and the offset is +24 in rear and +44 in front. they are direct bolt per dazz and lsportline. price wasn't cheap tho...d'oh $4300 w/o tires or s/h...yikes :eek:

lexrx - thanks for the support!
Old 07-01-02, 06:49 AM
  #8  
ObiDon
Driver
 
ObiDon's Avatar
 
Join Date: Jun 2001
Location: Houston, Texas
Posts: 184
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally posted by StrmRdr23
thanks!

sprint - the rims are 20x8.5 and the offset is +24 in rear and +44 in front. they are direct bolt per dazz and lsportline. price wasn't cheap tho...d'oh $4300 w/o tires or s/h...yikes :eek:

lexrx - thanks for the support!
StrmRdr23 Just a question on the offset. Why +44 in the front? Can' wait to see pics.
Old 07-01-02, 10:48 AM
  #9  
StrmRdr23
Pole Position
Thread Starter
 
StrmRdr23's Avatar
 
Join Date: Jan 2002
Location: Washington
Posts: 333
Likes: 0
Received 0 Likes on 0 Posts
Default

obi - not sure why the +44 offset in front. that's what lsportline/dazz suggested. something bout should allow me to turn corner to corner w/o rubbing...we'll see! i think the rims will be here late this week *crossing fingers*
Old 07-09-02, 06:19 AM
  #10  
StrmRdr23
Pole Position
Thread Starter
 
StrmRdr23's Avatar
 
Join Date: Jan 2002
Location: Washington
Posts: 333
Likes: 0
Received 0 Likes on 0 Posts
Default

ok, got the rims and they are beautiful! too bad they were missing the center caps. lsportline is over-niting them to me and they should be here today...gonna do a test fitting this afternoon as well...i've taken pics of the rims fresh out the box but haven't had time to upload the pics yet...will try to get on that tonite...
Old 07-10-02, 06:41 PM
  #11  
StrmRdr23
Pole Position
Thread Starter
 
StrmRdr23's Avatar
 
Join Date: Jan 2002
Location: Washington
Posts: 333
Likes: 0
Received 0 Likes on 0 Posts
Default front rim

these are 20x8.5 +44 offset...they fit well w/o spacers
Attached Thumbnails so it begins...-p7050002.jpg  
Old 07-10-02, 06:45 PM
  #12  
StrmRdr23
Pole Position
Thread Starter
 
StrmRdr23's Avatar
 
Join Date: Jan 2002
Location: Washington
Posts: 333
Likes: 0
Received 0 Likes on 0 Posts
Default front rim pt 2

closer look at the lip...because of +44 offset, lip is smaller on front
Attached Thumbnails so it begins...-p7050005.jpg  

Last edited by StrmRdr23; 07-10-02 at 06:53 PM.
Old 07-10-02, 06:48 PM
  #13  
StrmRdr23
Pole Position
Thread Starter
 
StrmRdr23's Avatar
 
Join Date: Jan 2002
Location: Washington
Posts: 333
Likes: 0
Received 0 Likes on 0 Posts
Default back rim

20x8.5 +24 offset...plenty of back spacing to clear rear strut...DIRECT BOLT, NO SPACERS! doesn't look like it's gonna stick out beyond wheel well either...
Attached Thumbnails so it begins...-p7050003.jpg  
Old 07-10-02, 06:51 PM
  #14  
StrmRdr23
Pole Position
Thread Starter
 
StrmRdr23's Avatar
 
Join Date: Jan 2002
Location: Washington
Posts: 333
Likes: 0
Received 0 Likes on 0 Posts
Default back rim pt 2

the rear lip is bigger...with the staggered set up it's gonna look almost like a rear wheel drive
Attached Thumbnails so it begins...-p7050004.jpg  

Last edited by StrmRdr23; 07-10-02 at 06:54 PM.
Old 07-10-02, 07:14 PM
  #15  
LexRX
RX 300 & 350Z Guru
 
LexRX's Avatar
 
Join Date: Feb 2001
Location: Georgia
Posts: 3,256
Likes: 0
Received 0 Likes on 0 Posts
Default

Beautiful wheels. I can't wait to see them on your RX. What tire size are you going with? Also, I checked wheelexpert.com and didn't see any sizes, do they come in 18?

Last edited by LexRX; 07-10-02 at 07:18 PM.


Quick Reply: so it begins...



All times are GMT -7. The time now is 07:54 PM.