dome unit removal - radar detector
#1
Driver
Thread Starter
dome unit removal - radar detector
I am attempting to wire my radar detector into the dome light assembly on my 2002 RX. Has anyone removed the assembly and have any familiarity with the hot and ground wires. I don't want to remove it incorrectly. Any assistance on removal of the assembly would be appreciated!
Thanks,
Bruce
Thanks,
Bruce
#2
Driver
Thread Starter
GOT IT!
Simply remove 2 screws in sunglass area and remove
lense of reading..remove one more screw and you're
there..if anyone else needs to remove same for access
to the power wires to hookup a radar detector etc.
Simply remove 2 screws in sunglass area and remove
lense of reading..remove one more screw and you're
there..if anyone else needs to remove same for access
to the power wires to hookup a radar detector etc.
#3
Lexus Test Driver
Join Date: Oct 2001
Location: New York
Posts: 1,015
Likes: 0
Received 0 Likes
on
0 Posts
WEL THANKS FOR THE POST, I DONT Have a need for the removal of it, but im gonna do it anway to check it out and maybe ill get some ideas and do something with it, lol. maybe just another source for 12 v power.
#4
Driver
Thread Starter
FYI
Within the wire cluster for the mirror, the solid red is
power on with ignition and the brass mounting screws
for the moonroof bracket are an excellent ground source!
power on with ignition and the brass mounting screws
for the moonroof bracket are an excellent ground source!
Thread
Thread Starter
Forum
Replies
Last Post
kuch123
GS - 3rd Gen (2006-2011)
10
07-11-10 02:58 PM