installing speakers on rx 300's 330's 99-02
#18
yes.. remove the door panels.. those speaker covers are attached to the door... they don't come off..
its pretty straight forward..
I used JL audio door speakers.. 6 3/4 up front... 6 1/2 in the back doors.. My stock ones were so fried they had no surround left on them.. Huge improvement.. You will also need the speaker mounts to go with them.. Unless I am mistaken, but i thought the stock speakers and mounts are one piece..
its pretty straight forward..
I used JL audio door speakers.. 6 3/4 up front... 6 1/2 in the back doors.. My stock ones were so fried they had no surround left on them.. Huge improvement.. You will also need the speaker mounts to go with them.. Unless I am mistaken, but i thought the stock speakers and mounts are one piece..
#20
When i bought my RX a few years ago, I installed Infinity speakers all around and using components up front. Couple those with a GROM unit and I have been very pleased with my sound and i spent very little money while doing the work myself which most anyone can do.
#21
Driver School Candidate
Join Date: Sep 2015
Location: Ca
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket powered amp for sub
How would I go about taking the sub lines from the original factory amp, and route them into an RCA input amp? I've already exposed everything from the rear to get to the factory amp. My amp that I currently have to put in for the sob is a line input RCA style I need to figure out which wires I need to splice into and make them into an RCA format. Any help or recommendations would be awesome.
Last edited by Telones; 09-06-15 at 10:05 AM. Reason: Addition
#22
Driver School Candidate
Join Date: Jul 2019
Location: British Columbia
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
How would I go about taking the sub lines from the original factory amp, and route them into an RCA input amp? I've already exposed everything from the rear to get to the factory amp. My amp that I currently have to put in for the sob is a line input RCA style I need to figure out which wires I need to splice into and make them into an RCA format. Any help or recommendations would be awesome.
Thread
Thread Starter
Forum
Replies
Last Post
tftimm
SC- 1st Gen (1992-2000)
3
07-15-11 06:38 AM
DMM100
RX - 1st Gen (1999-2003)
5
12-25-10 07:48 AM
sarah
Lexus Audio, Video, Security & Electronics
5
07-22-09 10:01 PM
CleanSC
Lexus Audio, Video, Security & Electronics
8
08-25-04 09:00 AM