RX - 1st Gen (1999-2003) Discussion topics related to the 1999 -2003 RX300 models

Driver Door Won't Lock or Unlock using key transmitter???????

Thread Tools
 
Search this Thread
 
Old 12-06-08, 04:41 PM
  #1  
afcab
Driver School Candidate
Thread Starter
 
afcab's Avatar
 
Join Date: Nov 2008
Location: tx
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Unhappy Driver Door Won't Lock or Unlock using key transmitter???????

My 2000 RX300 all of a sudden is having a little bit of lock/unlock trouble. When we use the tranmitter on the key to lock or unlock the car, the driver door is the only one that doesn't respond. All of the other doors lock and unlock fine. The driver door can still be locked and unlocked with the key with no problems

Has this happened to anyone else or does any one know how to fix this? I am thinking there may have been a fuse blown somewhere. Any input would help.

Thanks!

Chris
Old 12-06-08, 04:56 PM
  #2  
salimshah
Moderator
 
salimshah's Avatar
 
Join Date: Apr 2001
Location: Austin, TX
Posts: 15,270
Received 995 Likes on 899 Posts
Default

Search on "door lock actuator" and you will find plenty of information. It seems like a common old age ailment.

If you are not an avid DIY and mechanically inclined, there are aftermarket solutions. A safer bet would be OEM replacement.

Salim
Old 12-06-08, 08:29 PM
  #3  
thomas1
Pole Position
 
thomas1's Avatar
 
Join Date: Sep 2006
Location: Sacramento, California
Posts: 3,035
Received 91 Likes on 77 Posts
Default

The replacement lock motor assembly will cost about $270 plus labor. However if you want to learn what the mechanically inclined do read this:
http://us.lexusownersclub.com/forums...opic=41219&hl=
Old 12-16-08, 08:02 AM
  #4  
2weims1box
Driver School Candidate
 
2weims1box's Avatar
 
Join Date: Dec 2008
Location: TX
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Wink

Salimshah, I'm having the same problem with the actuator as afcab and I read the instructions given by Indy. Unfortunately, I'm not mechanically inclined. I'm in the Austin area and if you've replaced these, I would appreciate it if you could teach me or I would be willing to pay you to replace these. Thanks!
Old 12-16-08, 12:36 PM
  #5  
jimmouse
Rookie
 
jimmouse's Avatar
 
Join Date: Oct 2004
Location: New York
Posts: 83
Likes: 0
Received 1 Like on 1 Post
Default

Mine had similar issue a few monthes ago. But not every time. I assumed water causing the issue since that happened after several really heavy rainy days. I speaded some silicon based lub into the hole on the side of the door and a few days later it fixed itself.
Old 12-16-08, 05:22 PM
  #6  
BOWTIE 3
Driver
 
BOWTIE 3's Avatar
 
Join Date: Jul 2003
Location: Virginia
Posts: 110
Likes: 0
Received 0 Likes on 0 Posts
Default

My wife's 2000 RX300 began having this problem about 3 years ago. The Lexus dealer wants about $550.00 to replace the driver door latch/actuator. So far she says " I don't think so "! Today it's costing her about $900.00 to have the ECU [ computer ] replaced because the current one doesn't recognize the master key. That's about half of the $1600.00 they say that it usually costs. I guess they're in the " Holiday Spirit "! What a " screw-job"! I can get a new PCM [ computer ] for my Silverado for less than $300.00!

Last edited by BOWTIE 3; 12-16-08 at 05:25 PM.
Old 12-16-08, 10:32 PM
  #7  
afcab
Driver School Candidate
Thread Starter
 
afcab's Avatar
 
Join Date: Nov 2008
Location: tx
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default in the process of fixing the door

I just received my door actuator in the mail from allelectronics.com. It only cost 5.50, so hopefully I can make it work. I will be doing the project soon so I can post pictures of the process. The actuator that isn't working is the drivers side door so hopefully the work can translate to the most part to other doors if people are having issues with them. Thanks to all for the initial responses and direction. I probably would have just let the problem go because there is no way I would pay over 500 dollars to avoid using my key to get into the car or flipping the switch to lock it on the way out. I guess it really doesn't bother me that much. Anyway I'll keep you all posted once I get around to the door.

Thanks!
Old 12-16-08, 11:56 PM
  #8  
code58
Lexus Champion
 
code58's Avatar
 
Join Date: Feb 2008
Location: Ca.
Posts: 1,709
Likes: 0
Received 11 Likes on 9 Posts
Default

Originally Posted by afcab
I just received my door actuator in the mail from allelectronics.com. It only cost 5.50, so hopefully I can make it work. I will be doing the project soon so I can post pictures of the process. The actuator that isn't working is the drivers side door so hopefully the work can translate to the most part to other doors if people are having issues with them. Thanks to all for the initial responses and direction. I probably would have just let the problem go because there is no way I would pay over 500 dollars to avoid using my key to get into the car or flipping the switch to lock it on the way out. I guess it really doesn't bother me that much. Anyway I'll keep you all posted once I get around to the door.

Thanks!
With a little mechanical aptitude and ability and a positive outlook on life it's not a bad job at all. Good Luck!
Old 12-21-08, 07:47 AM
  #9  
ISMAN1000
Driver
iTrader: (2)
 
ISMAN1000's Avatar
 
Join Date: Sep 2008
Location: ca
Posts: 113
Likes: 0
Received 1 Like on 1 Post
Default

My wife's car now has this problem on both the driver and rear passenger doors. I am incline to replace the actuator myself. If anyone know where and what part number actuator I need to purchase please PM me. She has a 2003 Rx300. Thanks in advance.
Old 12-21-08, 08:43 AM
  #10  
salimshah
Moderator
 
salimshah's Avatar
 
Join Date: Apr 2001
Location: Austin, TX
Posts: 15,270
Received 995 Likes on 899 Posts
Default

Originally Posted by 2weims1box
Salimshah, I'm having the same problem with the actuator as afcab and I read the instructions given by Indy. Unfortunately, I'm not mechanically inclined. I'm in the Austin area and if you've replaced these, I would appreciate it if you could teach me or I would be willing to pay you to replace these. Thanks!
I have not had the need to replace the lock or even open the door panel of my RX. I follow code58's advice, strictly on own vehicles.

I will gladly call you over to see, when and if I replace the actuator on my RX,

Exchange of money for service, adds the obligation on the provider to do a competent job and cover the risk of damage. That is why dealers charge lot extra for the work. They eat the cost of damage which may happen and it does.

My, advice .. live with it and save every month to get it fixed.

Salim
Old 02-21-10, 04:59 AM
  #11  
python1
Driver School Candidate
 
python1's Avatar
 
Join Date: Sep 2009
Location: ny
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default

afcab did the allelectronics $ 5.50 actustor work, i have a 2002 rx300 driver side lock that does not work with key fob but does work with key, fix work? thanks
Old 02-22-10, 12:08 PM
  #12  
python1
Driver School Candidate
 
python1's Avatar
 
Join Date: Sep 2009
Location: ny
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default

no rush but did you do the job yet!!! anxiously awaitin the gory details of this fix, thanks D
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
davidyal
RX - 1st Gen (1999-2003)
8
07-05-22 01:00 PM
python1
RX - 1st Gen (1999-2003)
28
03-18-18 02:25 AM
Stu
LS - 3rd Gen (2001-2006)
5
03-01-17 07:07 PM
Pos300
GS - 2nd Gen (1998-2005)
3
06-09-15 01:36 PM
AlphaJZS
GS - 2nd Gen (1998-2005)
3
09-09-04 02:56 PM



Quick Reply: Driver Door Won't Lock or Unlock using key transmitter???????



All times are GMT -7. The time now is 10:39 AM.