Turbo?
#1
Driver School Candidate
Thread Starter
Join Date: Feb 2002
Location: Florida
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Turbo?
Is any one adventurous enough to go that route, what's the compression ratio in the RX300 anyway?
Just got a 01 RX300 but can't waste 82k miles worth of remaining warranty, just yet.
...........
Turbo toy
Just got a 01 RX300 but can't waste 82k miles worth of remaining warranty, just yet.
...........
Turbo toy
#4
Are you running "The Link" for engine management? Or do you have a link to them? They are actually sorta hard to track down
Originally posted by Visitor
Thanks.
We're getting warm, at least one turbo guy here.
Thanks.
We're getting warm, at least one turbo guy here.
#5
Driver School Candidate
Thread Starter
Join Date: Feb 2002
Location: Florida
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
I was running the piggyback version of the Link until a few days ago, I am 98% through with the Tec 2 install.
Go to the power section of the Miata forum (not sure if I can link to it here), FLYING MIATA has a banner there, they are a Link vendor.
Hey, you really are a turbo guy, you even know of the Link.
The RX seems to accelerate quite nicely, to my surprise, I even got a chirp from it leaving a light. I guess one day it will be my "turbo toy".
Go to the power section of the Miata forum (not sure if I can link to it here), FLYING MIATA has a banner there, they are a Link vendor.
Hey, you really are a turbo guy, you even know of the Link.
The RX seems to accelerate quite nicely, to my surprise, I even got a chirp from it leaving a light. I guess one day it will be my "turbo toy".
#6
Thanks. I tried lurking around in there but for some reason I couldn't locate a maker phone/email. I'll try again.
I'm currently trying to get a custom manifold fabbed for my 1992 V6 Maxima(hence the name) The RX is the wifey's toy. I actually had the turbo system on but the homemade manifold leaked like hell. So I took it off and asked someone to jig it and make a copy correctly.
I'm curious about the link because Nissan engine mangement is non-extistant(except for pre-programed JWT ecus)
I'm currently trying to get a custom manifold fabbed for my 1992 V6 Maxima(hence the name) The RX is the wifey's toy. I actually had the turbo system on but the homemade manifold leaked like hell. So I took it off and asked someone to jig it and make a copy correctly.
I'm curious about the link because Nissan engine mangement is non-extistant(except for pre-programed JWT ecus)
Thread
Thread Starter
Forum
Replies
Last Post