Appearence upgrade...
06-27-01, 06:08 PM
#1
Guest
Posts: n/a
Last night after dinner I decided to pin-stripe my RX. I've been putting it off since I purchased it this past May. The color is Burnished Gold Metallic so I used a thin double stripe of metallic silver. I have to say it looks pretty good. I've always had a knack at pin-striping and have been doing it for friends and family for the last 25 years. When I was done I had enough time to install the Lexus rubber bumper protector to the rear bumper. This helps protect the top of the bumper from scratches and also gives the rear of the vehicle a more "finished" look.
Hopefully by next month I'll be installing my Borla exhaust. I'll keep everyone posted...
Have an ICE day...
Coach
Hopefully by next month I'll be installing my Borla exhaust. I'll keep everyone posted...
Have an ICE day...
Coach
06-27-01, 09:03 PM
#2
RX 300 & 350Z Guru
Join Date: Feb 2001
Location: Georgia
Posts: 3,256
Likes: 0
Received 0 Likes
on
0 Posts
I installed the bumper pad too, I love the way it looks and is a necessity to me. I would love to see pictures of the borla when you are finished. Hope is sounds good - I like the RodMillen exhaust too. I will eventually get one or the other.
07-12-01, 08:00 AM
#4
Pole Position
Join Date: May 2001
Location: il
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Scuff Plates
Anyone interested in purchasing brand new scuff plates for a RX 300 from 2001 model. These will fit perfect on 99-00. The originals are snapped in by three clips, easily removable with a screw driver. I paid $150 from autoperformance. Will sell it for $110 includes S/H
C:\TEMP\RX-ScuffPlate1.jpg
C:\TEMP\RXrearscuff11.jpg
If the link doesn't work go to
http://www.autonetperformance.com/Autonet.htm
C:\TEMP\RX-ScuffPlate1.jpg
C:\TEMP\RXrearscuff11.jpg
If the link doesn't work go to
http://www.autonetperformance.com/Autonet.htm
07-12-01, 09:22 AM
#5
RX 300 & 350Z Guru
Join Date: Feb 2001
Location: Georgia
Posts: 3,256
Likes: 0
Received 0 Likes
on
0 Posts
Re: Scuff Plates
Originally posted by malhokc
Anyone interested in purchasing brand new scuff plates for a RX 300 from 2001 model. These will fit perfect on 99-00. The originals are snapped in by three clips, easily removable with a screw driver. I paid $150 from autoperformance. Will sell it for $110 includes S/H
Anyone interested in purchasing brand new scuff plates for a RX 300 from 2001 model. These will fit perfect on 99-00. The originals are snapped in by three clips, easily removable with a screw driver. I paid $150 from autoperformance. Will sell it for $110 includes S/H
-Nick
07-12-01, 11:43 AM
#6
Pole Position
Join Date: May 2001
Location: il
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Lex RX,
They have been used for 24 hours, I put them on, but my wife didn't wan't it, so took it next day. I think it looked great, but who am I to say, since she drives it most of the time.
They originally came in a plastic wrap and a non-custom box. I have the wraps and could get a similar box to mail.
The price I quoted is for all four doors (2 front, 2 back)
If interested email me at
malhokc@hotmail.com
They have been used for 24 hours, I put them on, but my wife didn't wan't it, so took it next day. I think it looked great, but who am I to say, since she drives it most of the time.
They originally came in a plastic wrap and a non-custom box. I have the wraps and could get a similar box to mail.
The price I quoted is for all four doors (2 front, 2 back)
If interested email me at
malhokc@hotmail.com
Trending Topics
07-25-01, 10:38 PM
#8
Lead Lap
Join Date: Feb 2001
Location: California
Posts: 707
Likes: 0
Received 0 Likes
on
0 Posts
Hey Coach,
You should put some "Coach Edition" emblems on...
http://cgi.ebay.com/ebaymotors/aw-cg...ndexURL=0&rd=1
Just a thought.
You should put some "Coach Edition" emblems on...
http://cgi.ebay.com/ebaymotors/aw-cg...ndexURL=0&rd=1
Just a thought.
Thread
Thread Starter
Forum
Replies
Last Post
CAMAracer
SC430 - 2nd Gen (2001-2010)
2
05-28-08 08:46 AM
TJW98LS
LS - 1st and 2nd Gen (1990-2000)
3
07-26-07 09:34 AM