When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks, I love the functionality. I'm currently sizing up some HREs at the moment. Do you have any pictures shooting down the side of the body. Any rubbing under hard acceleration/braking in turns?
Thanks, I love the functionality. I'm currently sizing up some HREs at the moment. Do you have any pictures shooting down the side of the body. Any rubbing under hard acceleration/braking in turns?
Thanks again,
CMR
front rubbed on the fender liner where there's that one spot that sticks out, on drivers side when going over dips at higher speeds. I've since raised the front by about 3mm and it seem to have taken care of that.
rears don't rub at all.
front rubbed on the fender liner where there's that one spot that sticks out, on drivers side when going over dips at higher speeds. I've since raised the front by about 3mm and it seem to have taken care of that.
rears don't rub at all.
Looks awesome 👍
Are you referring to the bolt that attaches the fender to the skirt?
Are you referring to the bolt that attaches the fender to the skirt?
CMR
If its anything like my old 4th Gen GS350, it's probably the part in the front where the fender liner bulges out covering the part where the fender bolts onto the body of the car.
If its anything like my old 4th Gen GS350, it's probably the part in the front where the fender liner bulges out covering the part where the fender bolts onto the body of the car.
Yup! Mine only rubbed on the plastic liner though, not the screw.