FlowForm Wheels - RC-F Renderings - Check it out!
02-26-16, 08:39 AM
#16
[QUOTE=FlowForm_Wheels;9349742][FONT="Century Gothic"][SIZE="3"]There's a 19" fitment and 20" fitment for the FF15's, here are the weights:
19x10 ET40 - 22.6lbs
19x11 ET55 - 23lbs
Is there a FF01 19s available size like this for ISF application. If not what are my choice. Pm me pricing , not a fun of ff15
19x10 ET40 - 22.6lbs
19x11 ET55 - 23lbs
Is there a FF01 19s available size like this for ISF application. If not what are my choice. Pm me pricing , not a fun of ff15
02-26-16, 08:44 AM
#17
Former Sponsor
Thread Starter
03-15-16, 08:31 AM
#18
Former Sponsor
Thread Starter
If you haven't seen this yet, you'll want to!
Taken from a thread you can find here - https://www.clublexus.com/forums/rc-...ar-review.html
I recently acquired a set of FlowForm FF15 wheels finished in redline color from HRE. The 20x10 front's offset are 40, wrapped in Pirelli P Zero 265/35/20 and the 20x11 rear's offset are 55, wrapped in 295/30/20 as recommended by HRE.
The front wheels with the tire (52 LBS 6.6 oz) are a bit heavier than my Vossen Forged VPS-311, about 4 LBS 3 oz per wheel in front and 1 LB 10 oz heavier per wheel in the rear (54 LBS 0.6 oz) with the tire. The front width of the wheels are .5 inch wider and I am running 265 vs 255, this is where most of the weight comes from...lol. The rear width of the wheels are the same and I am running 295 vs 285. The 295s are 1 LB heavier than 285s, so that makes the HRE almost, if not, the same as the Vossen Forged rears.
Keep in mind, I did the weigh the Vossens with about 9K miles on the tires.
The front wheels are almost flush with the fenders and they do rub while taking turns higher than 35-40 MPH. The rears wheels sits a bit more in the wheel well than front, but they do not rub at all. I will probably raise my coils up a few mm before the SCCA track night next month.
The Pirelli P Zero tires on these wheels are great! Feels like it grips a lot more than the crappy Hankook Ventus Evo 2...lol. Overall the wheels are different from what I am used to, it's slowly growing on me, I still do like my Vossens, and still deciding about what color I want to refinish them to, maybe matte red or matte black, i don't know yet...lol.
Pics below and a video also! Enjoy!
https://drive.google.com/file/d/0B_5...RyLU1YeTA/view
The front wheels with the tire (52 LBS 6.6 oz) are a bit heavier than my Vossen Forged VPS-311, about 4 LBS 3 oz per wheel in front and 1 LB 10 oz heavier per wheel in the rear (54 LBS 0.6 oz) with the tire. The front width of the wheels are .5 inch wider and I am running 265 vs 255, this is where most of the weight comes from...lol. The rear width of the wheels are the same and I am running 295 vs 285. The 295s are 1 LB heavier than 285s, so that makes the HRE almost, if not, the same as the Vossen Forged rears.
Keep in mind, I did the weigh the Vossens with about 9K miles on the tires.The front wheels are almost flush with the fenders and they do rub while taking turns higher than 35-40 MPH. The rears wheels sits a bit more in the wheel well than front, but they do not rub at all. I will probably raise my coils up a few mm before the SCCA track night next month.
The Pirelli P Zero tires on these wheels are great! Feels like it grips a lot more than the crappy Hankook Ventus Evo 2...lol. Overall the wheels are different from what I am used to, it's slowly growing on me, I still do like my Vossens, and still deciding about what color I want to refinish them to, maybe matte red or matte black, i don't know yet...lol.
Pics below and a video also! Enjoy!
https://drive.google.com/file/d/0B_5...RyLU1YeTA/view
03-15-16, 10:51 AM
#19
Can you get the wheels in black with a red/polished-silver lip? How about a lighter gunmetal with a silver/polished lip?
If so, can you post some renders? Looking for 20x9.5 front and 20x10.5 rears. Is that available? What are the weights for each and pricing? Also, do they come more concave than that?
Also, what other models come in flow formed that you can do some renders for us?
If so, can you post some renders? Looking for 20x9.5 front and 20x10.5 rears. Is that available? What are the weights for each and pricing? Also, do they come more concave than that?
Also, what other models come in flow formed that you can do some renders for us?
The following users liked this post:
GunnyFitz (01-24-19)
03-15-16, 10:54 AM
#20
Former Sponsor
Thread Starter
Can you get the wheels in black with a red/polished-silver lip? How about a lighter gunmetal with a silver/polished lip?
If so, can you post some renders? Looking for 20x9.5 front and 20x10.5 rears. Is that available? What are the weights for each and pricing? Also, do hey come more concave than that?
Also, what other models come in flow formed that you can do some renders for us?
If so, can you post some renders? Looking for 20x9.5 front and 20x10.5 rears. Is that available? What are the weights for each and pricing? Also, do hey come more concave than that?
Also, what other models come in flow formed that you can do some renders for us?
Optional colors seen above. Tarmac (Satin Black) and Liquid Silver are both standard options not shown above.
The following users liked this post:
GunnyFitz (01-24-19)
03-15-16, 02:26 PM
#21
I've been puzzled about that. Why not? The FF01 is attractive. Give it to us in 5x114.3 PCD and 19" diameter. You'll find plenty of folks in the Japanese vehicle world run 114.3 19" wheels; Subaru, Lexus, Mitsubishi (lower offset), Nissan, Acura, Honda, Infiniti....
03-15-16, 02:28 PM
#22
Former Sponsor
Thread Starter
03-15-16, 02:33 PM
#23
Initially when we first did the FF01 we didn't see the demand for it, but if you're saying there is a demand I can certainly pass that along to the people who need to know that, but so far you're the only one that I personally know of who is requesting the 19" size. If anything, you could gather enough people and let us know if you'd like it in a 19" size and we'll see, but for the time being it'll only be 20" for the FF01.
It would probably easier for me to purchase a set of RS100M than find enough committed people on this forum to purchase a custom run of FF01.
03-15-16, 05:25 PM
#24
Since there is no lip on this wheel, it's a monoblock wheel, we wont be able to have any polished lip, I'm sorry. We do have Tarmac (Satin Black) as one of our standard finishes as well as Anthracite and Fog which you may be interested in. What would you prefer to see and on what color RC-F?
Optional colors seen above. Tarmac (Satin Black) and Liquid Silver are both standard options not shown above.
Optional colors seen above. Tarmac (Satin Black) and Liquid Silver are both standard options not shown above.
03-17-16, 07:41 AM
#26
Former Sponsor
Thread Starter
20x11 FF01's weigh 26.6lbs
20x11 FF15's weigh 24.6lbs
03-18-16, 10:03 AM
#28
03-21-16, 03:09 PM
#29
Former Sponsor
Thread Starter
03-22-16, 01:42 PM
#30
This rendering of Anthracite looks to be brighter and have more of a gun metal blue hue to it than the picture of Anthracite in post #27. I like to finish, but I wouldn't want anything darker, just a little bit brighter would be perfect.