RC F Aftermarket Wheels (Merged Threads)
05-01-15, 08:18 PM
#16
NICE Ride B! 
I'd Love to get a lil' Wider Rear Wheel/Tire but it seems like i read somewhere on here that there Isn't ANY extra room under there!
I'd Love to get a lil' Wider Rear Wheel/Tire but it seems like i read somewhere on here that there Isn't ANY extra room under there!
Last edited by johnnyreb; 05-01-15 at 08:23 PM.
05-02-15, 12:58 AM
#18
But I'll see whats up after I test fit, hopefully I can still rock 275's on 11" +24.Congrats on the new F. The Molten Pearl looks so goooood.
Here is my setup.
20x9.5 et25 w/ 245/30/20
20x10.5 et25 w/ 275/30/20
Attachment 360917
Attachment 360915
Attachment 360916
Here is my setup.
20x9.5 et25 w/ 245/30/20
20x10.5 et25 w/ 275/30/20
Attachment 360917
Attachment 360915
Attachment 360916
05-02-15, 06:58 AM
#19
here's the exact same setup I'm going with....you can easily fit a 20x11 in there with a 285. You just can't get too crazy an offset. If you want a more aggressive offset you'd likely have to stick with a 275. You can do it though 
05-02-15, 06:35 PM
#21
I saw this car at Toyotafest today in Long Beach, I asked the Lexus guys if they knew the specs of the wheels (offsets/widths), but they didn't know. I like how it sat on those 20's, I wish I knew the offsets so I can start looking for wheels. I'll need to do more researching.
05-05-15, 05:26 PM
#23
For reference, here's some test fits we've done on the RC-F. As far as "plug-n-play" fitment, these specs seem to sit fairly flush. There is, however, a bit more room for a lower offset 9.5 (FRONT) and lower offset 10.5 or 11 (REAR) with just a bit of negative camber.
VMR V702
20x9 ET35
20x10 ET35
Flow Form VMR V810
19x9.5 ET33
19x10.5 ET35
VMR V702
20x9 ET35
20x10 ET35
Flow Form VMR V810
19x9.5 ET33
19x10.5 ET35
05-06-15, 06:51 PM
#24
For reference, here's some test fits we've done on the RC-F. As far as "plug-n-play" fitment, these specs seem to sit fairly flush. There is, however, a bit more room for a lower offset 9.5 (FRONT) and lower offset 10.5 or 11 (REAR) with just a bit of negative camber.
VMR V702
20x9 ET35
20x10 ET35
Flow Form VMR V810
19x9.5 ET33
19x10.5 ET35
VMR V702
20x9 ET35
20x10 ET35
Flow Form VMR V810
19x9.5 ET33
19x10.5 ET35
Last edited by boostedGS; 05-06-15 at 06:54 PM.
The following users liked this post:
JamesDean3 (12-29-20)
05-06-15, 09:55 PM
#27
I Don't think i've seen any 5 spokes with a deep dish? do they make them for these cars or will they just not fit? I've always liked a 5-spoke because they're so easy to clean (that's especially true on these cars because they get so much dust on them) & i've always liked a wheel that had a med. to deep lip on them!
05-06-15, 10:29 PM
#28
I Don't think i've seen any 5 spokes with a deep dish? do they make them for these cars or will they just not fit? I've always liked a 5-spoke because they're so easy to clean (that's especially true on these cars because they get so much dust on them) & i've always liked a wheel that had a med. to deep lip on them!
05-07-15, 09:27 AM
#29
I have the gloss graphite CVT wheels...not sure about the offset but I think it could be a bit more agressive (will find out) but here is what I know:
Front = 20 x 9 / 255 tire
Rear = 20 x 10.5 / 285 tire (need to get exact sizes)
Front = 20 x 9 / 255 tire
Rear = 20 x 10.5 / 285 tire (need to get exact sizes)
