installed RSR lowering springs, rear didnt get lower
#1
Driver School Candidate
Thread Starter
Join Date: Aug 2014
Location: California
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
installed RSR lowering springs, rear didnt get lower
hey guys i installed rsr lowering springs on my rc350 f sport RWD the front is lowered very nice but i didnt get any drop on the rear, any ideas what could be wrong? did i put in the springs wrong? i have the RSR marking on the springs facing the wheels, should they be facing towards the front end of the car? any help is appreciated. i contacted RSR and the guy wasnt really helpful
#3
I have an awd and when i put the springs on the back didnt seem to change either its bc i believe the back springs were already low compared to the awd front so the front is noticeable but the back drop isnt. I had tanabes put on mine.
Maybe they didnt settle in yet?
Maybe they didnt settle in yet?
#5
Sorry thought i pmd u back on that one. Phillips screw driver
Open the hood
Ull see a few holes that lead to adjusting the headlights. US models i believe one hole is on the far right. I Forget about the left side probabaly the same. Put the screwdriver in turn ur headlights on and adjust as u please
Open the hood
Ull see a few holes that lead to adjusting the headlights. US models i believe one hole is on the far right. I Forget about the left side probabaly the same. Put the screwdriver in turn ur headlights on and adjust as u please
#6
Driver School Candidate
Thread Starter
Join Date: Aug 2014
Location: California
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
sorry for late reply i rarely get to sit down and have a free time lol i will post pictures by tomorrow definitely. i know when they settle it only drops a little bit not much.
Trending Topics
#9
Driver School Candidate
Thread Starter
Join Date: Aug 2014
Location: California
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
no the wheels have been installed for about a month now, tire size is 275 30 20. im looking at other people with same setup as me just diffrent wheels and having no gap but i can easily put 3 fingers in the gap!
Thread
Thread Starter
Forum
Replies
Last Post