RealMCR12

Mine is lowered on Tanabe's. Height is just about perfect to how i wanted it.

Dtl6843

Bagged my 350 AWD.

Does anyone know if BC makes coilovers for the the AWD?

The rear bags sit very close to the rear sway bar and actually touch it if aired out. Anyone on bags completely removed the sway bar if that's even possible?

lexual_rc

Yes head lights need to be readjusted even tho the streets are still visible. The real draw back I noticed to lowering the car tho, is the headlights of other owners cars which seem to be right in my face now...

SpeedRcr

Looks great! Any complications with the install or post launch?

SpeedRcr

RealMCR12, I know the model number is all over these forums but could you share which model ot Tanabe's that you installed?

Thank you!

S

RedBullFTW

AWD dropped on RS-R Superdowns.

ZeroG

My bad, I indicated the drop on the Superdowns. My drop was 1"

SpeedRcr

Just ordered a set of Tanabe NF210's. Everyone (AWD) running those still happy with their purchases?

lexual_rc

Running for over a year now with no issues. No rubbing even with my rims on and the comfort level hasn't degraded. Very close to stock but a barely rougher ride just so you can actually feel the road.

rcJten

For me, the NF210's left my front too high, with uneven fender gaps front to back, so I cut a half coil in the front. I'll be installing my J5 coilovers very soon!

NF210 drop:


Half-coil cut from fronts:


Custom J5 coilovers with AVS:

lexual_rc

Heres a more recent pic after being worn in over a year although I felt they were even right from the start.

SigmonC

I'm looking to lower just the front and "Level out" my ride on my 350 AWD. Has anyone done this by using the factory RWD front springs? I really don't want it any lower than the stock RWD ride height as I still drive the car in the snow.

LxsCf RCF

I installed the RSR super down springs in the front only on my RC 350 AWD F Sport and IMO it was the perfect setup. I had the same gap in the front and rear.

SigmonC

That makes sense as that's what I'm going for, However they do tend to settle more over time as I've heard. How long have they been installed for now?

Amiricle55

Thank you everyone for the photos and documenting which set up works well for you. I had heard that some people were experiencing problems with suspension, handling, and even slowing of the automatic gear changing when the car is placed in sport + mode after changing to aftermarket springs. I have heard this from two different people (one of them being my Lexus service rep who had someone come in with this problem after installing RSR springs). Has anyone experienced this? I would really appreciate your input as I am very interested in lowering my RC AWD but do not want to run into any problems.