When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
All 4 corners of mine are spot on even. It's possible the orientation of the spring in the perch was clocked wrong on yours during install. They have to be set the same from side to side.
A slight rotation either way from the end of the last coil in the perch either way can make a big difference.
I just noticed your car seems to be RWD, right? I wonder if my issue has something to do with AWD vs RWD.
Any other members with AWD using the springs notice the corners are not even? Thanks everyone.
Lowered the front of mine today have to wait till I buy a smaller rear tire I have a 275/35-20 I need to buy a 30 series I made a mistake while ordering the tires anyways
LRCSALES, thanks for the pic. So, from the pic above, to be clear, the drop is at the front only and rear is stock height? if so, looks good and already even. I question the need to even drop the rear which may otherwise make the front look higher again relative to the rear.