2JZGTE GS300 Cranks, Won't Start
08-09-15, 03:41 PM
#1
Rookie
Thread Starter
2JZGTE GS300 Cranks, Won't Start
Greetings Everyone,
After finishing my swap, connecting everything up, new spark plugs, oil/oil filter, transmission fluid, using the aristo fuel pump, car cranked, and ran like a champion. So, I followed a member who recommended swapping the pins on the grey plug on the aristo harness to make the shift lock/release, and the tach to work, which worked, but weird enough it would not fire up, and run any longer
. I verified the crank, cam sensors are functioning. Verified there is 12volts to the injectors. Pulled the new plugs, and they were dark black on all 6. I couldn't imagine the timing getting off somehow, but what ideas do you guys have? I'm all out at this point, here's a video of what it is doing now. Any ideas, advice would be appreciated, thanks!
After finishing my swap, connecting everything up, new spark plugs, oil/oil filter, transmission fluid, using the aristo fuel pump, car cranked, and ran like a champion. So, I followed a member who recommended swapping the pins on the grey plug on the aristo harness to make the shift lock/release, and the tach to work, which worked, but weird enough it would not fire up, and run any longer
. I verified the crank, cam sensors are functioning. Verified there is 12volts to the injectors. Pulled the new plugs, and they were dark black on all 6. I couldn't imagine the timing getting off somehow, but what ideas do you guys have? I'm all out at this point, here's a video of what it is doing now. Any ideas, advice would be appreciated, thanks!
Thread
Thread Starter
Forum
Replies
Last Post
fromxtor
2Gen GS430 / 400/ 300 Classifieds (98-05)
28
07-08-13 05:04 PM
assasin123
Performance & Maintenance
4
08-11-06 02:28 AM
