Tsudo Dual Catback Exhaust
#17
Driver School Candidate
Thread Starter
The exhaust is pretty deep around 2-2.5k rpms. After 3k rpms is when the exhaust gets throaty. If I were to choose one word, it sounds solid. Highway driving is a breeze. Can barely hear the exhaust when cruising. Around the city is when the exhaust shines.
#18
Instructor
#20
Lead Lap
iTrader: (2)
is it stainless steel or will it rust out in a couple of months... what kind of warranty will it have, and where do you have to send it to get that taken care of? those would be the things I worry about a Chinese knock off... yes you can save money, but if any of you know what the Cobra MX bikes are like then you know what I am talking about. The parts are impossible to find and it is almost cheaper to buy a whole new one that go through the hassle of trying to fix it....
I would just be cautious of where it is coming from and if they offer a warranty if something were to go wrong or if it happened to throw a code for your engine...
I would just be cautious of where it is coming from and if they offer a warranty if something were to go wrong or if it happened to throw a code for your engine...
#21
Pole Position
iTrader: (23)
Just bought this exhaust on Ebay for $600. The exhaust is listed for 650 but i made an offer of $600 and the seller agreed.
My intentions on the exhaust is to use to the mid-pipe only. Compared to the invidia going for 500+ i get an axle back also for an extra 100 if i decide to install it after.
Just thought i would share in case someone was on the fence about buying this exhaust at this price range.
My intentions on the exhaust is to use to the mid-pipe only. Compared to the invidia going for 500+ i get an axle back also for an extra 100 if i decide to install it after.
Just thought i would share in case someone was on the fence about buying this exhaust at this price range.
#22
Just bought this exhaust on Ebay for $600. The exhaust is listed for 650 but i made an offer of $600 and the seller agreed.
My intentions on the exhaust is to use to the mid-pipe only. Compared to the invidia going for 500+ i get an axle back also for an extra 100 if i decide to install it after.
Just thought i would share in case someone was on the fence about buying this exhaust at this price range.
My intentions on the exhaust is to use to the mid-pipe only. Compared to the invidia going for 500+ i get an axle back also for an extra 100 if i decide to install it after.
Just thought i would share in case someone was on the fence about buying this exhaust at this price range.
#23
Pole Position
iTrader: (23)
I will be putting up the axle back for sale in the classified section in case someone is interested in it.
Last edited by jay90011; 05-26-15 at 07:22 AM.
#24
So I installed the exhaust today on my is350. After driving it for about 20 miles with full cat-back I decided to just keep the midpipe for the sound I wanted. With full catback there was too much drone from 2k - 4.5k. The exhaust fit perfect and I was surprised on the quality of the welds. The inside cabin drone I can compare it to is the HKS hipower I had on my 2Gen IS250. Overall Welds and bends is up to name brand parts like invidia, tanabe and Hks which I owned at one point on my 2Gen IS.
I will be putting up the axle back for sale in the classified section in case someone is interested in it.
I will be putting up the axle back for sale in the classified section in case someone is interested in it.
#27
Driver School Candidate
Join Date: Nov 2016
Location: Massachusetts
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Thanks i see they have an axle back i dont think they have a catback for my year and if they do not for AWD i believe but i cant find the exhaust anywhere its all back ordered or out of stock ;(
#28
So I finally pulled the trigger on one last week and got it today and had it installed by my mechanic. First impression is that the exhaust sounds solid. It's not raspy nor does it drone. In some RPMS I don't even hear it but when you push the car, you definitely hear it. Overall, with what I spent on it, I'm extremely happy. The fitment is a little off but it's barely noticeable. It seems to be good quality. After the winter, I'll report back on how it held up to our canadian weather.
Can't wait until it's broken in.
Can't wait until it's broken in.
#29
So I finally pulled the trigger on one last week and got it today and had it installed by my mechanic. First impression is that the exhaust sounds solid. It's not raspy nor does it drone. In some RPMS I don't even hear it but when you push the car, you definitely hear it. Overall, with what I spent on it, I'm extremely happy. The fitment is a little off but it's barely noticeable. It seems to be good quality. After the winter, I'll report back on how it held up to our canadian weather.
Can't wait until it's broken in.
Can't wait until it's broken in.