Carbon fiber driveshaft
#1
Carbon fiber driveshaft
Hi guys, I just wanted to share some information on an extremely worthwhile modification that recently became available for the RWD ISx50 (and ISF by request):
One piece Carbon fiber drive shaft
WOW! The guys at The Driveshaft Shop in NC custom built this shaft and it's amazing. I've run DSS products on a 2jzgte is300 and was nothing but happy. I knew the DSS would be up to the challenge of building a stout shaft for the is350. This new cf ds is nothing short of perfection!
From a design perspective it's a 3.25 Carbon fiber shaft using a 108mm CV that eliminates the front and rear guibos. The shaft and its custom wound fiber is designed for 1000Hp and a critical speed of over 220MPH. The back has a Solid 1350 joint (same size as a Top HP Drag car) and comes with all hardware.
Its torsional properties are what make it so good! This and the fact that the Guibos and soft hanger are no longer there to make the drivetrain feel soft or soggy, it will have a more athletic feel as well as all he benefits one should expect from such design. The car just feels like it wants to gooooooo now!
These should be on sale any day and only from-
The Driveshaft Shop
Http://www.driveshaftshop.com
1-800-564-2244
One piece Carbon fiber drive shaft
WOW! The guys at The Driveshaft Shop in NC custom built this shaft and it's amazing. I've run DSS products on a 2jzgte is300 and was nothing but happy. I knew the DSS would be up to the challenge of building a stout shaft for the is350. This new cf ds is nothing short of perfection!
From a design perspective it's a 3.25 Carbon fiber shaft using a 108mm CV that eliminates the front and rear guibos. The shaft and its custom wound fiber is designed for 1000Hp and a critical speed of over 220MPH. The back has a Solid 1350 joint (same size as a Top HP Drag car) and comes with all hardware.
Its torsional properties are what make it so good! This and the fact that the Guibos and soft hanger are no longer there to make the drivetrain feel soft or soggy, it will have a more athletic feel as well as all he benefits one should expect from such design. The car just feels like it wants to gooooooo now!
These should be on sale any day and only from-
The Driveshaft Shop
Http://www.driveshaftshop.com
1-800-564-2244
#4
WOW! I live an hour from the Driveshaft Shop! Free installation! I dare not ask how much that thing was.
Any benefits for my 250? haha
Any benefits for my 250? haha
Last edited by daileycon; 10-28-14 at 05:37 AM.
#5
Def. contact the DSS! I'm not sure msrp has been set yet but these should be for sale any day. I would HIGHLY recommend this mod for a crisp drivetrain feel that's noticeable even pulling out of your driveway.
My car is basically parted out waiting to be traded in. Another forum member is enjoying this driveshaft.
Yes, they used my supplied stock driveshaft and did all the R&D from the shaft and our rear diff/tranny setup. Very detailed process and the end result speaks for itself! The stock shaft is returned after all is said and done.
I have a stock ISF driveshaft I was going to send in before my build became no more. If you need it let me know.
My car is basically parted out waiting to be traded in. Another forum member is enjoying this driveshaft.
I have a stock ISF driveshaft I was going to send in before my build became no more. If you need it let me know.
Last edited by mikellucci; 10-28-14 at 06:45 AM.
#6
Since the SARD ECU tune won't be available for USDM IS350s, this might be the next best thing for a highly responsive drivetrain.
I just sent an email to DSS to inquire about the MSRP. I might have to put this on my Christmas wish list.
I just sent an email to DSS to inquire about the MSRP. I might have to put this on my Christmas wish list.
Last edited by redspencer; 10-28-14 at 06:19 AM.
Trending Topics
#9
Here's the response to my email. I guess no free installation haha I emailed back asking if the 350 and 250 have the same driveshaft. Two questions, is it the same shaft and is $1400 worth it?
Hi
were actually a machine shop/manufacturing facility. we dont actually install parts here
the shaft is 1399.99
Hi
were actually a machine shop/manufacturing facility. we dont actually install parts here
the shaft is 1399.99
Last edited by daileycon; 10-28-14 at 02:41 PM.
#13