Is350 in the 1/4 12's Roll Call
10-12-14, 03:15 PM
#33
Driver
iTrader: (4)
Join Date: Feb 2012
Location: quebec, canada
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
I would say Passenger seat .10
Cold weather.10-.15
I dont think i can make a 12s run at 25degree
I have one last mod to try its the mapecu3
I have it at home now but not sure ill have time to tune it this year
The track is closing at the end of october
Will see if there is a few hp hidden somewhere in my car
11-02-14, 12:36 PM
#36
Driver
iTrader: (4)
Join Date: Feb 2012
Location: quebec, canada
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Last day of 1/4 racing today with a new record<br/>Ive cheat a little bit remove back seat and passenger seat��<br/>And its cold outside 45f<br/>Side wind not helping<br/>Really fast 60 1.84
11-03-14, 01:58 PM
#42
Great time! Your 60 foot time is very impressive. What rpm are you launching at, are you pedaling off the line? Or are you full throttle after initial launch? Are you doing any burnouts before you line up? I cant launch at more than about 1200 rpm before the tires break loose and my best 60 foot times are 2.02 w/ a 1/4 mile time of 13.122.
11-03-14, 05:14 PM
#43
Driver
iTrader: (4)
Join Date: Feb 2012
Location: quebec, canada
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Great time! Your 60 foot time is very impressive. What rpm are you launching at, are you pedaling off the line? Or are you full throttle after initial launch? Are you doing any burnouts before you line up? I cant launch at more than about 1200 rpm before the tires break loose and my best 60 foot times are 2.02 w/ a 1/4 mile time of 13.122.
Full throttle after initial launch
little spin in the water to clean tire then after a good burnout
Must have glue on the track
My tire are kuhmo 265/30/19
