1UZ Twin Turbo V160 6 spd is done!!!
#91
congrats man, I love my 6 speed GS300 too. It looks like you used a B+M shifter with a really long shift ****? Your lock out looks to be under the center console.
The stock / Aftermarket V160 shifters are too short unless you raise the transmission, I didn't want to do that so I wound up making 1 shifter out of two stockers, love the feel of it now. As Ropadopa said, welcome to the 6 speed club, there is only a handful of us. I'm going to get the panel / boot reworked in the future, the shifter is finally perfect though.
Rick Bowers at Speedtech made the shifter for me if you need one
The stock / Aftermarket V160 shifters are too short unless you raise the transmission, I didn't want to do that so I wound up making 1 shifter out of two stockers, love the feel of it now. As Ropadopa said, welcome to the 6 speed club, there is only a handful of us. I'm going to get the panel / boot reworked in the future, the shifter is finally perfect though.
Rick Bowers at Speedtech made the shifter for me if you need one
It is deep though, it sounds like your solution would be perfect. PM me with what he charged you to make that up. I might suggest it to my guy too.
Thanks
I swear fellas, vids are coming. the weather has been perfect for it the last two weekends, but all of my boys have been tied up and unable to shoot for me.
#92
Lexus Champion
iTrader: (4)
Hey TTurbo, not jacking your thread, but I just drove the car for the first time in 4 years...Check it out on my thread in the SC Forum, Post #916: https://www.clublexus.com/forums/performance-and-maintenance/517834-sc400tt-project-car-stage-ii-62.html#post5703855
Ryan
Ryan
#93
I bought the tranny with a supra short shift kit on it already, we just used a B&M plate to seal things up in the tunnel, no B&M shifter. the funny thing is I didnt even think about a shift **** until it was all done. I left the shop with no damn ****, ended up stopping by PepBoys and getting some bull**** $15 **** to throw on there for the meantime. I grabbed the longest one possible, and it actually sits pretty good. Reverse clears the console, just closer to the back then I would like from the visual standpoint. Remember, the adapter plate makes the tranny sit back probably 1.5"'s for the 1UZ. If this was bolted up on a 2JZ, it would sit perfectly.
It is deep though, it sounds like your solution would be perfect. PM me with what he charged you to make that up. I might suggest it to my guy too.
Thanks
I swear fellas, vids are coming. the weather has been perfect for it the last two weekends, but all of my boys have been tied up and unable to shoot for me.
It is deep though, it sounds like your solution would be perfect. PM me with what he charged you to make that up. I might suggest it to my guy too.
Thanks
I swear fellas, vids are coming. the weather has been perfect for it the last two weekends, but all of my boys have been tied up and unable to shoot for me.
Even with the 2JZ and V160 it sits too far back. Measure twice, cut once!
Last edited by adamgamz; 08-10-10 at 08:15 AM.
#101
So why the change from the UZ to the JZ? How much did the UZ make in the end with the 6sp?
Why did I swtich motors out?
I actually was parting out the car to move on to a new project. I got 3/4 the way through that and decided to keep it. At that point the motor was gone,l the TT set up was gone, the electronics were gone, the body kit was gone, etc, etc..
even though I managed to mate the V160 up to the 1UZ, I was really limited on certain things.....like the clutch and flywheel. I felt like I was always chasing something to make that set up perfect. When mating together parts that dont belong with each other, there are always things your not 100% happy with. Im a picky bastard though.
When doing it over the 2nd time around I decided to stick to the 2JZ GTE drivetrain. I had 3 Supra's back in the day, so Im real familar with what to do and what I know I would be happy with.
What I do know is I absolutely love the car as it sits now. My boy Ben at Freed Engineering did it right for sure.
Last edited by TTurboPimp; 07-09-14 at 05:56 PM.
#102
Lexus Test Driver
Still big pimpin' I see........lol
Sup big dawg? I see you're still at it. Don't give me the fever again. You know I have a race motor just sitting on a stand at the shop itching to do something with. Sam is fighting me cause we'd have to go stand-alone and he doesn't want me to ruin DD out of it. I'd still like to do it and mate that 6 spd to it. That's what I'd always wanted to do.
Glad to see OG's still holding it down. Props bud.
Sup big dawg? I see you're still at it. Don't give me the fever again. You know I have a race motor just sitting on a stand at the shop itching to do something with. Sam is fighting me cause we'd have to go stand-alone and he doesn't want me to ruin DD out of it. I'd still like to do it and mate that 6 spd to it. That's what I'd always wanted to do.
Glad to see OG's still holding it down. Props bud.
#103
Driver School Candidate
Join Date: Jul 2014
Location: co
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
so the single turbo 2JZ-GTE is pushing out more power than a previous 1UZ with TT?
#105
Lexus Test Driver
Join Date: Mar 2001
Location: 808state
Posts: 1,393
Likes: 0
Received 0 Likes
on
0 Posts
I still think you need to give your car a vacation and let it visit it's cousin in Hawaii!! LOL.
Same torque? so does it feel faster or pull harder? Glad all is well my friend.
Nice to see that the original horseman is still galloping along!!
Aloha
Same torque? so does it feel faster or pull harder? Glad all is well my friend.
Nice to see that the original horseman is still galloping along!!
Aloha
Thread
Thread Starter
Forum
Replies
Last Post