mas3423

iTrader: (2)

I just installed my Fsport exhaust yesterday and noticed that the left muffler doesn't seem to sit the same way as the right one. It seems like it almost hangs down a little bit on a slant, which is making the left tip look a little different then the other side. Any help or suggestions!? Due to the massive amounts of snow we just got I wasn't able to take a pictures of this yet.

funnie

iTrader: (14)

people say that the left side of the fsport exhaust hangs just a bit lower than the right. Some people are using zip ties to level out the left side.

mas3423

iTrader: (2)

Ok, so atleast im not the only one that thinks this too. But wouldnt zip ties melt due to the hot surface of the exhaust? Any pictures of this setup?

mas3423

iTrader: (2)

Zip ties did the trick!

JoshIS408

iTrader: (11)

Zip ties where? Mine sags too, bt i said fk it and i jus left it.

quang

iTrader: (8)

+1, the difference is very invisible unless you stare long and close.

mas3423

iTrader: (2)

no, mine was definetly really noticable. the left muffler seemed to be hanging down on an angle. I used 2 zip ties, one around the muffler hanger, then the other one somewhere else. you have to be a little creative.

06isDriver

ya know....people bashed me for buying that top speed exhaust that required some hangar modification. At least I know now that it doesnt matter how much money you spent...the hangars could still be fubared.

ilv1004s

iTrader: (8)

how about usinga smaller hanger?

BS ISF

if someone can get demensions on the stock hangers, there are plenty of other sizes that could close up the gap.

here are a small sample from autozone

http://www.autozone.com/autozone/cat...uestid=1166405

combfilter

iTrader: (3)

This isn't just a f-sport problem. Lots of exhaust do this on the IS. Both my borla and my magnaflow did it. Zipties work.