Performance Forced induction, intakes, exhausts, torque converters, transmissions, etc.

GS430 exhaust REAL performance data

Thread Tools
 
Search this Thread
 
Old 02-21-07, 08:28 AM
  #1  
jgordon089
Driver School Candidate
Thread Starter
 
jgordon089's Avatar
 
Join Date: Feb 2007
Location: TX
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Exclamation GS430 exhaust REAL performance data

I'm reaching out to the knowledge base in this forum to provide some data (preferably dyno charts) for the various aftermarket exhaust systems you can purchase for the GS V8.
I have a 2001 GS430. To date I've done the SRT intake and that's it. I am very impressed with the results. I now have the S&S headers on order and also want to add a cat back or rear aftermarket exhaust system. I'm very concerned about loosing low end Hp/torque because it seems to me many of these system have oversized piping. I fully understand a cat back or rear system is going to yield very little power gain by itself, but I certainly don't want to loose low end power.
With that being said, who can enlighten me with performance dyno data on various aftermarket systems? Carson?. GREDDY EVO2? Tanabe? etc......

PLEASE HELP!
Thanks
Old 02-21-07, 08:33 AM
  #2  
DaveGS4
Forum Administrator

iTrader: (2)
 
DaveGS4's Avatar
 
Join Date: Feb 2001
Location: North Carolina
Posts: 31,433
Received 2,128 Likes on 1,298 Posts
Default

https://www.clublexus.com/forums/sho...t=exhaust+dyno

Welcome to CL! This is the only before / after dyno on exhaust only I recall specifically, but think there was one other. Similar results <2hp
Old 02-21-07, 08:53 AM
  #3  
jgordon089
Driver School Candidate
Thread Starter
 
jgordon089's Avatar
 
Join Date: Feb 2007
Location: TX
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks Dave,

That is one sweet GS you have.

Anyone else know of any other results? How about recommendations on systems based on their pipe diameters, etc....?
Old 02-21-07, 01:42 PM
  #4  
400DGRZ
Lexus Champion
iTrader: (2)
 
400DGRZ's Avatar
 
Join Date: Feb 2001
Location: ALABAMA
Posts: 2,936
Received 14 Likes on 6 Posts
Default

Jgordon,

what kind of numbers did your SRT intake/ecu produce on the dyno?
Old 02-21-07, 02:42 PM
  #5  
jgordon089
Driver School Candidate
Thread Starter
 
jgordon089's Avatar
 
Join Date: Feb 2007
Location: TX
Posts: 38
Likes: 0
Received 0 Likes on 0 Posts
Default

Don't know. I didn't dyno the car before or after the SRT intake. This is a mod that you do feel in the seat of your pants. Also sounds mean at WOT.

I'm not so concerned about gaining any real power with an exhaust, just don't want to loose any power anywhere in the RPM range. I have a question in to S&S headers to see if they have a recommended system to compliment their headers. I'm sure they have some dyno data.
Old 02-23-07, 03:39 PM
  #6  
BC-GS430
Lexus Test Driver

 
BC-GS430's Avatar
 
Join Date: Dec 2001
Location: NorCal
Posts: 1,194
Likes: 0
Received 0 Likes on 0 Posts
Default

Most of the people with S&S headers tell me its more responsive. I have the carson tuned cat back and i think it matches the srt intake very well.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SBG
Performance
7
01-16-08 09:21 PM
hurricane
Performance
7
12-19-07 07:14 PM
AnimalB
Performance
11
07-23-07 10:07 AM
Yeah!
GS - 3rd Gen (2006-2011)
13
05-17-06 03:56 PM
Cannonbear
Performance
4
06-06-04 09:34 PM



Quick Reply: GS430 exhaust REAL performance data



All times are GMT -7. The time now is 01:27 AM.