Do these price seem right?
#1
Rookie
Thread Starter
Join Date: Sep 2002
Location: fl
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Do these price seem right?
Hey, I just bought 2 new rear rotors, pads, and shim kits for my car; as well as Denso iridium plugs and stock lexus wires.
I just called a few shops and got these price quotes for labor.
Plug/Wire install will be around $80-$90
Rear rotor / pads will be around $95-$95
To get the resonators cut off the exhaust (guy said they are 15inches, i though they were shorter) is gonna cost around $75-$90 total.
Just wondering if these seem high...low...or fair. These are the first things I am having installed on the sc300 and dont wanna get taken.
1994 Sc300
Thanks
I just called a few shops and got these price quotes for labor.
Plug/Wire install will be around $80-$90
Rear rotor / pads will be around $95-$95
To get the resonators cut off the exhaust (guy said they are 15inches, i though they were shorter) is gonna cost around $75-$90 total.
Just wondering if these seem high...low...or fair. These are the first things I am having installed on the sc300 and dont wanna get taken.
1994 Sc300
Thanks
#4
Lexus Fanatic
iTrader: (1)
seems pretty high
i had my whole exhaust bent, mounted and welded for $100 cutting the resonators out isn't going to do a damn thing for performance at all; just make your car resonate more (and it won't be much louder at all)
plug wire install takes like 15-20 minutes; dunno why it costs that much
rotors and pads for $95 isn't too bad... but still kinda moderate
i'll never let a shop touch my car for little things like that; i'll do my own work unless it involves rebuilding the tranny or fabricating parts...
i had my whole exhaust bent, mounted and welded for $100 cutting the resonators out isn't going to do a damn thing for performance at all; just make your car resonate more (and it won't be much louder at all)
plug wire install takes like 15-20 minutes; dunno why it costs that much
rotors and pads for $95 isn't too bad... but still kinda moderate
i'll never let a shop touch my car for little things like that; i'll do my own work unless it involves rebuilding the tranny or fabricating parts...
Thread
Thread Starter
Forum
Replies
Last Post
cssnms
GX - 1st Gen (2004-2009)
18
10-19-15 11:25 AM
theanimala
GS - 2nd Gen (1998-2005)
2
09-14-02 05:33 PM