When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I bought a set of M2's (Manzo's) a couple of years ago from an eBay seller. I believe it was an eBay seller although one shop carried the same model and part number locally.
I love them. No fart can sound. It's not too loud but is an aggressive exhaust system compared to what most OEMs put on their cars. More of a "tuned" sound. There is some bass in tunnels and overpasses but it's just enough bass mixed with other frequencies.
Compared to the majority of exhaust systems available for the SC they are not as prone to being overkill on NA cars where there is tremendous booming bass. Turbos tend to better compliment many other SC exhausts.
I'd put the M2/Manzo, Borla and... the one particular mild Tanabe dual system in the same general grouping of choices and style.
They're super easy to install. I think I had both done in less than half an hour, just propping it up with my knee while reaching under the car un-jacked.
Hopefully your bolts on stock mufflers are not to corroded.....I wasnt able to get them off so ended up removing whole exhaust from cat back.....then decided to ditch the stock exhaust and go full 3"
Good luck and post pics up when you get them installed
^ I think I might have sprayed my bolts ahead of time with PB Blaster. They came out easily, although this area isn't known for road salts. A breaker bar should be able to tear them apart (literally) even if rusted, though. What's the worst that can happen...
Hopefully your bolts on stock mufflers are not to corroded.....I wasnt able to get them off so ended up removing whole exhaust from cat back.....then decided to ditch the stock exhaust and go full 3"
Good luck and post pics up when you get them installed
Aside from the rust, looks like mine has a spot welded around the bolts.