Performance & Maintenance Engine, forced induction, intakes, exhausts, torque converters, transmissions, etc.

No Idle...need suggestions!!

Thread Tools
 
Search this Thread
 
Old 03-14-15, 09:08 AM
  #1  
russia4lov
Driver School Candidate
Thread Starter
iTrader: (1)
 
russia4lov's Avatar
 
Join Date: Oct 2007
Location: new Jersey
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Default No Idle...need suggestions!!

Greetings!
92 SC 400...I have no idle...must keep foot on gas constantly...runs ok this way.
Vaccum leak...mass air flow problem....iacv problem.....
Any suggestions on where to start....possibly device needs cleaning???
Any DIY links for the above mentioned possibilities?

Thanks for your help!
Old 03-14-15, 09:11 AM
  #2  
rudyH
Pole Position
 
rudyH's Avatar
 
Join Date: Jan 2015
Location: CA
Posts: 367
Received 3 Likes on 3 Posts
Default

Originally Posted by russia4lov
Greetings!
92 SC 400...I have no idle...must keep foot on gas constantly...runs ok this way.
Vaccum leak...mass air flow problem....iacv problem.....
Any suggestions on where to start....possibly device needs cleaning???
Any DIY links for the above mentioned possibilities?

Thanks for your help!
Recently someone had a similar problem. It turned out cleaning the IAC solved the guy's problem. Might be worth a try. The owner reported it took minutes and was very easy to do.
Old 03-15-15, 07:47 AM
  #3  
SC400slide
In Recovery Mode

iTrader: (11)
 
SC400slide's Avatar
 
Join Date: Apr 2012
Location: NM
Posts: 3,868
Received 33 Likes on 27 Posts
Default

If your ECU hasn't been touched in the past 23 years, chances are the capacitors are leaking and corroding the board inside your ECU. Get that things rebuilt. Even if it doesn't correct the issue you're having, it probably needs it.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NZMatt
RX - 2nd Gen (2004-2009)
4
10-23-17 08:07 AM
lex1220
Performance & Maintenance
24
08-23-11 09:45 PM
1WILLY1
Performance & Maintenance
13
10-17-10 04:48 PM
ISzBest
IS - 1st Gen (2001-2005)
4
11-13-01 10:09 PM



Quick Reply: No Idle...need suggestions!!



All times are GMT -7. The time now is 01:56 AM.