No overdrive / cruise control
#1
No overdrive / cruise control
So this morning I headed out to go to a memorial service for a 2nd cousin that recently passed away. When I got onto the highway, I immediately noticed that the transmission failed to shift into OD. I looked to see if I had accidently hit the button on the shifter, I hadn't. Even when I disengage the button, nothing, light on the dash doesn't come on either. Also the cruise control isn't working now, also no light?? Are these 2 interconnected somehow?
I did a search on the issues, but nothing seems to fit with what I have going on. Fluid level is fine and the only recent thing I've done was take the cluster out to replace some burnt out bulbs. Suggestions?
I did a search on the issues, but nothing seems to fit with what I have going on. Fluid level is fine and the only recent thing I've done was take the cluster out to replace some burnt out bulbs. Suggestions?
#6
just pulled the cluster apart to check / change bulbs on the CEL to see if I was getting any codes. Even exchanging known good blubs for the one that lights up the CEL, still can't get it to come on with just the key in the "on" position? Also, TRAC is also not working. I'm thinking it is something stupid like a fuse or relay??
Trending Topics
#9
Driver School Candidate
want to bump this as I have the EXACT same problem on my 1JZ Soarer.
OD and Cruise do not work, there is no light showing on the cluster for it either when trying to activate it.
need help!
OD and Cruise do not work, there is no light showing on the cluster for it either when trying to activate it.
need help!
Thread
Thread Starter
Forum
Replies
Last Post